Description of insertion type dn500 dn1200 integrated sanitary
clamp electromagnetic flow meter:
This battery powered electromagnetic flow meter is mainly used to
measure various acid, alkali, salt solution, pulp, mud and other
conductive liquid, or liquid mixed with liquids and solids.And the
digital integrated electromagnetic flow meter converts the liquids
into 4-20mA current signal output.
Features of insertion type dn500 dn1200 integrated sanitary clamp
electromagnetic flow meter:
The plug-in electromagnetic flowmeter has the characteristics of a
ducted electromagnetic flowmeter and a plug-in flowmeter. These
features include:
Measurements are not affected by changes in fluid density,
viscosity, temperature, pressure, and conductivity.
Adopt advanced excitation technology, low power consumption, stable
zero point, strong anti-interference ability and good reliability.
No additional pressure loss, requiring a small length of straight
pipe.
The flow measurement range is wide, and the full-scale flow rate
can be continuously set arbitrarily from 1.0m/s to 10.0m/s, and the
output signal is completely linear with the flow rate (flow rate).
The conversion display adopts 16-bit high-performance
microprocessor, 2×16 LCD display, convenient parameter setting and
reliable programming.
The flowmeter is a two-way measurement system with three
integrators that display the total amount of forward flow, reverse
flow, and the difference between positive and negative flow.
The conversion display has multiple outputs: current, pulse,
digital communication, HART.
Suitable for large diameter pipes, DN300-3000mm.
The sensor body and electrodes are available in a variety of
materials.
The utility model has the advantages of small volume, light weight,
convenient transportation and installation, and can realize
continuous flow maintenance and dis-assembly.
The price is cheap, the larger the installation diameter, the
higher the performance price ratio.
Specification of insertion type dn500 dn1200 integrated sanitary
clamp electromagnetic flow meter:
| Pipe nominal diameter | DN100-3000mm | Working pressure | ≤1.6MPa |
| Working temperature | ≤70 °C | Accuracy | ±1.5% |
| Upper flow rate range | adjustable from 1 to 10 m/s | Electrode material | 304, 304L, 316, 316L, Hastelloy, Ti, etc |
| Medium conductivity | ≥50μs/cm | Maximum distance | ≤ 50m |
| Cable | RVVP type double core shielded cable or STT3200 type four core
three shielded cable |
| Please refer to the instruction manual of our electromagnetic flow
meter for the function of the conversion display. |
Flow range of insertion type dn500 dn1200 integrated sanitary clamp
electromagnetic flow meter:
DN(mm) | 0.5(m/s) | 1.0(m/s) | 1.5(m/s) | 2.0(m/s) | 2.5(m/s) | 3.0(m/s) |
| 300 | 127.2 | 254.4 | 381.6 | 508.8 | 636.0 | 763.2 |
| 350 | 173.1 | 346.2 | 519.3 | 692.4 | 865.5 | 1038.6 |
| 400 | 226.1 | 452.2 | 678.3 | 904.4 | 1130.5 | 1356.6 |
| 450 | 286.2 | 572.3 | 858.3 | 1144.6 | 1430.8 | 2574.9 |
| 500 | 353.3 | 706.5 | 1059.8 | 1413.2 | 1766.5 | 2119.8 |
| 600 | 508.7 | 1017.0 | 1526.0 | 2034.0 | 2544.0 | 3052.0 |
| 700 | 682.4 | 1385.0 | 2047.0 | 2730.0 | 3412.0 | 4094.0 |
| 800 | 904.3 | 1808.0 | 2713.0 | 3617.0 | 4522.0 | 5126.0 |
| 900 | 1145.0 | 2290.0 | 3435.0 | 4580.0 | 5725.0 | 6870.0 |
| 1000 | 1413.0 | 2826.0 | 4239.0 | 5652.0 | 7065.0 | 8478.0 |
| 1200 | 2034.0 | 4068.0 | 6102.0 | 8136.0 | 10170.0 | |
| 1400 | 2770.0 | 5540.0 | 8310.0 | 11080.0 | 13850.0 | |
Applications of insertion type dn500 dn1200 integrated sanitary
clamp electromagnetic flow meter:
The plug-in electromagnetic flow sensor (hereinafter referred to as
"sensor") and the company's electromagnetic flow conversion display
constitute a plug-in electromagnetic flow meter. The plug-in
electromagnetic flow meter is generally of a split type, and can be
integrated into one type if required by the user. The sensor is
installed on the pipeline where it needs to be tested. The
split-type display is installed in a nearby wall or in a metered
instrument box. It can also be installed in the instrument and
control room. The two are connected in the sensor's junction box
with a dedicated cable. . The split type conversion display is
mounted directly on the upper end of the sensor.
Plug-in electromagnetic flow meters are used to measure the flow
and total amount of various conductive liquids in various sectors
such as industrial, agricultural, water conservancy,
environmentally-friendly sewage monitoring, and urban water supply.
Detailed images of insertion type dn500 dn1200 integrated sanitary
clamp electromagnetic flow meter:
