Electric Japan Yaskawa 50/60hz servopack Servo Drive 100W 200V
SGDS-01A01A
Quick Details
Configuration:
• Rated Output of Servomotor: 100W
• MECHATROLINK-II IF+ Serial Fully-Closed Interface
• Supply Voltage: 200-230V
Features
High Performance
Various Tuning Functions
New Digital Operator
New Upgrades for Enhanced Performance
Description
The Yaskawa Sigma-3 series uses up-to-date technology for
high-speed, high-frequency and accurate positioning. It is equipped
with functions to adapt the servo drive to your machine perfectly
and to support the required performance.
Many types of servomotors allow best combination for any
application to make the system design more simple and the
positioning more accurate. Following the Yaskawa policy to make
user-friendly products, specified software is designed to easily
and quickly select, adjust and maintain the servo and related
equipment.
High-speed but smooth positioning is achieved with minimum machine
vibration. Wide motor selection enables the construction of an
optimal system. A new digital operator with 5-line display improves
the operability. Various tuning functions adjust the servo
according to the actual operation conditions. A wide selection of
new additional functions maximize machine performance and enables
the easy customisation of servo systems. Further specifications
round out the qualities of Sigma-3. MECHATROLINK- Network provides
real-time communication. Up-to-date application software supports
selection and adjustment of the motor on a personal computer.
Sigma-3 is made for high-speed and high-response performance. It
especially applies for machines that require high productivity with
a quick tact time.
Similar Products
| SGDS-01A01A |
| SGDS-01A01A+SGMAS-01ACA21 |
| SGDS-01A02AY524 |
| SGDS-01A05A |
| SGDS-01A12A |
| SGDS-01A15A |
| SGDS-01F01A |
| SGDS-01F12A |
| SGDS-02A01A |
| SGDS-02A01A SGMAS-02ACA21 |
| SGDS-02A01A+SGMAS-02ACA21 |
| SGDS-02A01A+SGMAS-02ACA2C |
| SGDS-02A01A+SGMAS-C2ACA21 |
| SGDS-02A01AR501 |
| SGDS-02A01ARY501 |
| SGDS-02A05A |
| SGDS-02A12A |
| SGDS-02A12AY506-E |
| SGDS-02A15A |
| SGDS-02A72A |
| SGDS-02F01A |
| SGDS-02F12A |
| SGDS-04A01a |
| SGDS-04A01A+SGMAS-04ACA21 |
| SGDS-04A02A |
| SGDS-04A101A |
| SGDS-04A105A |
| SGDS-04A12A |
| SGDS-04A12AY27 |
| SGDS-04A12AY511 |
| SGDS-04A15A |
| SGDS-04F01A |
| SGDS-08A01A |
| SGDS-08A05A |
| SGDS-08A12A |
| SGDS-08A12AY27 |
| SGDS-08A12AY506-E |
| SGDS-08A12AY524 |
| SGDS-08A15A |
| SGDS-10A01A |
| SGDS-10A12A |
| SGDS-10A15A |
| SGDS-15A01A |
| SGDS-15A01A/SGDS-15A05A |
| SGDS-15A01AR501 |
| SGDS-15A05A |
| SGDS-15A12A |
Regenerative Power and Regenerative Resistance
The rotational energy of a driven machine, such as servomotor, is
returned to the SERVOPACK. This is called the regenerative power.
The regenerative power is absorbed by charging the smoothing
capacitor, but when the chargeable energy is exceeded, the
regenerative power is further consumed by the regenerative
resistor. The servomotor is driven into the regeneration state in
the following circumstances:
• While decelerating to a stop during acceleration and deceleration
operation.
• With a load on the vertical axis.
• During continuous operation with the servomotor rotated from the
load side (negative load). The SERVOPACKs with a capacity of the
single-phase 200 V with 50 to 400 W or 100 V with 50 to 400 W do
not have built-in regenerative resistors. If the operation exceeds
the rotating sp
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG- Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X- Emerson VE-,KJ-
Honeywell TC-,TK- Fanuc motor A0-
Rosemount transmitter 3051- Yokogawa transmitter EJA-
