OMRON AC Servo Motor R88M-G1K020T-B-Z 1000W With brake The maximum
rotation speed of R88M-series
Sysmac is a trademark or registered trademark of OMRON Corporation
in Japan and other countries for OMRON factory automation products.
Windows is either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
EtherCAT® is registered trademark and patented technology, licensed
by Beckhoff Automation GmbH, Germany.
Other company names and product names in this document are the
trademarks or registered trademarks of their respective companies.
The product photographs and figures that are used in this catalog
may vary somewhat from the actual products. Microsoft product
screen shot(s) reprinted with permission from Microsoft
Corporation.
Reduced Tact Time with Higher Speed
Maximum rotation speed : 6,000 r/min*
The maximum rotation speed of R88M-series Servomotors has increased
to 6,000 r/min, resulting in high-speed positioning that can reduce
tact time.
Industry Top-class Tracking Performance
Speed Response Frequency of 2 kHz
Speed response is representative of servo system characteristics.
In the G5, the industry’s fastest response has been achieved at 2
kHz. By improving the speed response by twice compared to previous
OMRON models, the stabilization time has been shortened and this
contributes to tact time reduction.
Best Positioning Accuracy
Featuring a 20-bit high-resolution incremental encoder
High-precision positioning can be achieved with the built-in
encoder, 8 times the resolution of previous OMRON models at 20
bits.
AC Servo Drives
General Specifications
| Item | Specifications |
|---|
| Ambient operating temperature and humidity | 0 to 55 °C, 20% to 85% max. (with no condensation) |
|---|
| Storage ambient temperature and humidity | -20 to 65°C, 20% to 85% max. (with no condensation) |
|---|
| Operating and storage atmosphere | No corrosive gases |
|---|
| Vibration resistance | 10 to 60 Hz and at an acceleration of 5.88 m/s2 or less (Not to be
run continuously at the resonance point) |
|---|
| Insulation resistance | Between power supply terminals/power terminals and FG terminal:
0.5 MΩ min. (at 500 VDC) |
|---|
| Dielectric strength | Between power supply/power terminals and FG terminal: 1,500 VAC
for 1 min at 50/60 Hz |
|---|
| Protective structure | Built into panel |
|---|
| EC Directives * | EMC Directive | EN 55011, EN 61000-6-2, EN 61800-3 |
|---|
| Low Voltage Directive | EN 61800-5-1 |
|---|
| Machinery Directives | EN954-1 (Cat.3), EN ISO13849-1 (Cat.3) (PLc, d), ISO13849-1 (Cat.3)
(PLc, d), EN61508 (SIL2), EN62061 (SIL2), EN61800-5-2 (STO),
IEC61326-3-1 (SIL 2) |
|---|
| UL standards | UL 508C |
|---|
| CSA standards | CSA C22.2 No.14 |
|---|
| Korean Radio Regulations (KC) | Certified |
|---|
* The certification from third party is issued in combination with
the revolution type motor. The conformance as the whole
system should be checked by machine builder.
Note: 1. The above items reflect individual evaluation testing. The
results may differ under compound conditions.
Note: 2. Always disconnect all connections to the Servo Drive
before you perform insulation resistance tests on it. If you
perform an insulation resistance test while the Servo Drive is
connected, the Servo Drive may be damaged.
Never perform dielectric strength tests on the Servo Drive. Failure
to follow this precaution may result in
damaging internal elements.
Note: 3. Some Servo Drive parts will require maintenance. For
details, refer to the G5 series USER'S MANUAL.
Confirm the Manual No. that is listed in Related Manuals.
Note: 4. Vibration, unstable movement, or accoustic noise may occur
by an exogenous noise. In such case, please
reduce incoming noise as referred in G5 series user's manuals.
WISDOMLONG TECHNOLOGY CO.,LIMITED
http://www.wtltian.com/en/
【Honeywell】Module DCS/PLC
【Emerson/Delta V】Module
【ABB】Module
【AB】Module&Touch Screen
【Rosemount】Transmitter
【Yokogawa】Transmitter
【Yaskawa】Servo Drive&Servo Motor
【GE/Fanuc】IC69 Series PLC
【Mitsubishi】Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
