NAUMR Standard Double Acting Rack and Pinion Pneumatic Actuator
aluminium alloy pneumatic actuator:
1. Actuator body: Body material is aluminium alloy, internal and
external surface by anodic oxidation and polishing treatment to 45-
50um.
- Indicator:Each standard product contacining a open or closed
indicator, which show valve position,
- Travel Adjustment: Through two bolt to adjustment 5`. and adjust at
o`and 90` position, we call it double insurance property.
- End Caps: Die-costing aluminium material(heavy), after epoxy
polyester p[erformance is the best .
- Heavy Duty Springs:Compound high strength spring by high strength
alloy steel, to ensure the best performance, the longest life
expectancy.
- Pinion Gear: Medium-Carbon Steel finish macining, then platin
nickel, to make the pistons have minimal friction, best
anti-friction and corrosion-proof.
- Piston Guides:Self-lubricating type guide(epoxy resin+GF) to ensure
the best reliability and stability.
- Piston Seals:Using NBR-70 rubber sealing ring to ensure actuator
have a reliable performance in normal temperature, if client needs
lower or higher temperature type, we can choose the sealing FPM.
- Piston:Die-casting aluminium alloy, with high quality seal. Make
the actuators in cerain input pressure can output the maxinum
toruqe. Double rack and gear make actuator output a continuous
torque. get through different types.
► Specifications of Pneumatic Actuator
1. Acting type: Double
2. Medium: clean, dry and without corrosive compressed air
3. Air supply pressure: 0.25 -0.8 Mpa
4. Working Temperature: Standard Type: -20°C~+80°C
Low-temperature Type: 
-40°C~+80°C
| Model | EX1 mm | EX2 mm | Od/mm | 15 | 2 | O Ring (Piston) |
| VS-052 | 1M6×25 | M6×20 | ∮15 | 16 | min.5/ max.12 | Spring (Cartridge) |
| VS-063 | M6×25 | M6×20 | ∮18 | 17 | 1 | Spring (Cartridge) |
| VS-075 | M8×30 | M6×25 | ∮20 | 18 | 1 | Spring Clip (Pinion) |
| VS-083 | M10×35 | M6×25 | ∮20 | 19 | 1 | Position Indicator |
| VS-092 | M10×40 | M8×30 | ∮25 | 20 | 1 | O Ring (Pinion botton) |
| VS-105 | M12×40 | M8×30 | ∮25 | 21 | 1 | O Ring (Pinion top) |
| VS-125 | M12×45 | M10×35 | ∮35 | 30 | 1 | End Cap (Right) |
| VS-140 | M14×55 | M10×40 | ∮40 | 31 | 1 | End Cap (Left) |
| VS-160 | M16×55 | M10×45 | ∮45 | 39 | 1 | Cap Screw (Indicator) |
| VS-190 | M16×65 | M12×55 | ∮50 | 40 | 2 | Piston |
| VS-210 | M16×70 | M14×60 | ∮55 | 41 | 1 | Actuator Identification Label |
| VS-240 | M16×80 | M16×65 | ∮55 | 50 | 1 | Body |
| VS-270 | M16×90 | M20×80 | ∮55 | 60 | 1 | Drive Shaft |
High-temperature Type:-20°C~+180°C
5. Rotate angle: 90°± 5°
6. Solenoid valve voltage: AC220V or DC24V , or as per customer’s
request.
► Design & Construction Of AT Series Double Acting Pneumatic
Actuator
1. Full conformance to the latest specification:
ISO5211DIN3337VD/VDE3845and NAMUR.
2. The extruding high-intensity aluminum body possesses a honed
internal surface coated with hone anode oxygenation for long life,
low coefficient of friction and swift performance.
3. Excellent, compact and modernized construction along with
multi-specifications make the selection both economic and
beneficial.
4. All acting surfaces adopt high-quality bearings, resulting in
low friction, high cycle life, and no noise. The two independent
external travel stop adjustment bolts can easily and precisely
adjust ±5°at both open and close directions.
5. The same outline actuator has the functional modes of double
acting and spring return, and the spring return has the normal-open
and normal-close styles.
6. Multi-function position indicator with NUMER is convenient for
mounting accessories.
7. Pre-compressed load spring is convenient for safe mounting and
teardown procedures.
8. Die-casting aluminum pistons and end caps have high intensity
and lightweight.
9. Different O-rings materials are available for high and low
temperature.
10. According to different demands we can offer Multi-travel
rotations (e.g. 120°135°180°) and three position actuators.
11. Solenoid valves are easily mounted without any connecting
plank.
► Transaction Process-Pneumatic Actuator
► FAQ-Pneumatic Actuator
1. Q: Is sample order acceptable?
A: Yes, of course.
2. Q: How to place the order?
A: You can send us an email or call me directly.
3. Q: How many days for delivery?
A: Normally within 15-20 days according to order quantity.
4. Q: How to make the payment?
A: We only accept T/T.
5. Q: How will you make the shipment?
A: By sea, air or express service.
