Plastic glass making machine GS288V
Specification
| GS288V |
| A | B | C |
| Injection Unit | | |
| Screw Diameter | mm | 55 | 60 | 65 |
| Screw L/D Ratio | L/D | 21.8 | 20 | 18.5 |
| Theoretical Shot Size | cm3 | 712.7 | 848.2 | 995.5 |
| Injection Weight | g | 648 | 771 | 905 |
| oz | 22.9 | 27.2 | 31.9 |
| Injection Pressure | MPa | 219 | 184 | 157 |
| bar | 2190 | 1840 | 1570 |
| Injection Rate | g/s | 228 | 271 | 318 |
| Plasticizing Capacity | g/s | 36.1 | 43 | 50.5 |
| Max. Screw Speed | rpm | 160 |
| Injection Stroke | mm | 300 |
| | |
| Clamping Unit | | |
| Clamping Force | kN | 2880 |
| Mold Opening Stroke | mm | 590 |
| Tie Bars Clearance | mm | 630×630 |
| Max. Mold Thickness | mm | 630 |
| Min. Mold Thickness | mm | 230 |
| Daylight Opening | mm | 1220 |
| Ejector Stroke | mm | 150 |
| Ejector Force | kN | 62 |
| Ejector Number | piece | 13 |
| | |
| General Data | | |
| Max. Pump Pressure | MPa | 16 |
| Pump Motor Power | kW | 30 |
| Heater Power | kW | 17.85 |
| Dimension (L×W×H) | m | 6.43×1.82×2.38 |
| Net Weight | t | 11.00 |
| Hopper Capacity | kg | 50 |
| Oil Tank Volume | L | 350 |
PRODUCT SHOW
1 LCD computer control with big display screen
2 Hydraulic proportional valve
3 Generous space for fitting large moulds
4 Large opening stroke
5 Two positon transducers to control clamping and injection
6 4-stage of injection speed, 3-stage of holding pressure, 4-stage
of metering phase can be setup according to products' requirement.
7 Optimal platen design, with toggle junction casting together with
platen improves rigidity of mechanical system hence improves
product dimensions accuracy
8 Screw and barrel are made of high quality new materials, which
extended the service life
9 Screw back pressure control
10 Multiple hydraulic ejection
11 Differential area high speed clamping
12 centralized lubrication system
13 All hydraulic components and seals are offered by famous
international manufacturers
14 Mechanical safety interlock
15 Electrical safety interlock
16 Oil return filter
Features
The GS-V plastic injection machine with variable pump series is the
fine product of energy saving of Guangsu Company, which adopt the
advanced international control technology of variable pump. The
product adopts high response proportional variable system, making
the output power of hydraulic system of plastic injection machine
matching with the actual consumption, avoiding the loss of high
pressure regulated flow and overflow. Compared to the machine with
common constant flow pump, 30%50% electricity can be saved, showing
obvious economic benefits.
In addition, the heat produced by the machine is low, reducing
around 30% cooling water consumption, reducing noise around the
machine, extending the service life of hydraulic seals of oil
circuit and hydraulic oil, reducing greatly the use and maintenance
cots of machine, at same time, the strict global
environment-friendly requirements are satisfied. The GS-V plastic
injection machine with variable pump series brings obvious economic
benefits to wide customers relying on its excellent performance.
The GS-V plastic injection machine with variable pump series shows
its excellent performance as below:
Energy saving 30-50%;
Quick response of system, short shaping period;
The oil temperature of system reduces greatly the produced heat;
Reduce the mold opening/closing impact, extending the service life
of machine and mold;
Extend the service life of oil circuit system, reducing maintenance
times, and saving large amount of maintenance cost;
High accuracy demand on hydraulic oil; and high accuracy return
filter is provided.
1.adopt the advanced international control technology of variable
pump
2.high response
3.avoid the loss of high pressure regulated flow and overflow
4.30~50% electricity saved
We all do best try to make products perfect!
