Plastic Injection Moulding Machine
Features of Plastics Injection Molding Machine
Injection Unit
1. Screw with optimum design enjoys features of good plasticity,
high efficiency;
2. Big L/D ratio of plasticizing screw;
3. Adjustable back pressure control and melt decompression device;
4. Duel carriage cylinder to maintain consistent nozzle to platen
alignment and nozzle pressure, precision and consistency;
5. Injection screw directly driven by a low speed high torque
hydraulic motor is suitable for processing various plastics. The
left diagram is to inject the sketch map.
Clamping Unit
1. Optimize designed five fulcrums and double inclined toggles
clamping unit has functions such as big force enlarge rate, high
speed placid movement and large mould-open distance;
2. Having hard chromed on the surface, the tie bars is
corrosion-resistant and wear resistant;
3. Mechanical and hydraulic eject device with one time or multiple
changing processes;
4. Hydraulic motor driven mould adjustment accelerates
mould-changing process;
Hydraulic And Control Unit
1. Easy operated 16BIT CPU multi-function computer;
2. LCD display panel, clear simple control makes it easy to
operate;
3. Alarm message with using statement, easy to troubleshooting;
4. Chinese/English language toggle mode, input and output use
photo-coupler to protect damage from out-side votary;
5. 50 sets mould data storage;
6. Close-loop PID tech, is used in temperature control with the
advantage of high precision;
| | GS608 |
A | B | C |
INJECTION UNIT
| Screw Diameter | mm | 80 | 85 | 90 |
Screw L/D Ratio | L/D | 23.4 | 22 | 20.8 |
Shot size(Theoretical) | cm3 | 1959 | 2210 | 2480 |
PS) Injection Weight | g | 1783 | 2011 | 2256 |
PS Injection Rate | g/s | 446 | 502 | 560 |
PS Plasticizing capacity | g/s | 70 | 85 | 110 |
Injection Pressure | Mpa | 201 | 178 | 159 |
Screw stroke | mm | 390 |
Screw Speed | rpm | 0-130 |
CLAMPING UNIT
| Clamp Tonnage | KN | 530 |
Toggle stroke | mm | 830 |
Space Between Tie Bars | mm | 840*840 |
Max.Mold Height | mm | 830 |
Min.Mold height | mm | 350 |
Ejector stroke | mm | 250 |
Ejector tonnage | KN | 160 |
Ejctor Numbre | peicc | 13 |
OTHERS
| Max.Pump Pressure | Mpa | 16 |
Pump Motor Power | KW | 55 |
Heater Power | KW | 32 |
PS Hopper Capacity | Kg | 150 |
Oil Tank Capacity | L | 1300 |
Machine Dimension(L*W*H) | m | 9*2.56*3.5 |
Machine Weight | t | 30 |
FAQ:
1) How can I place order?
A: You can contact us by email about your order details, or place
order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC
bank) and Paypal, Western Union are the most usual ways we are
using.
3) What’s the order procedure?
A: First we discuss order details, production details by email or
TM. Then we issue you an PI for your confirmation. You will be
requested to do pr -epaid full payment or deposit before we go into
production. After we get the deposit, we start to process the
order. We usually need 7-15days if we don’t have the items in
stock. Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective
products?
A: replacement. If there are some defective items, we usually
credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We
check the goods when they go into next step production procedure.
