Touch Screen Microcomputer Single Column Tensile Testing Machine
with Stroke 1200mm
Brief Introduction:
For mechanical properties testing of non-metallic materials such as
rubber, plastics, wires and cables, textiles, waterproof materials,
and non-woven fabrics, and wire, metal foils, sheet metal, and
metal rods.
Fixtures are also suitable for a variety of finished products
stretching, compression, peeling, shearing, tearing test to
determine the quality of the product.
iqualitrol iRY-5 can store the results of 10 test reference points,
automatically calculate the average value, automatically grab the
maximum value, the strength value at the time of breaking.
The machine includes a thermal printer that automatically outputs
test results. (optional)
iRY-5 is simple in structure and easy to operate, can be placed
directly on the floor for testing. Especially suitable for use in
the production line to control the product quality.
Technical Specifications:
| Max Capacity | 500kgf |
| Force accuracy | Within ±0.5% of indication |
| Display method | LCD display, touch type |
| Unit switching | Kgf, lb, N |
| Data sampling frequency | 200times/sec |
| Test machine resolution | Maximum load 1/±25000 yards, no division inside and outside, and
full resolution |
| Load sensor | Basic configuration: pull, pressure sensor (maximum load) |
| Effective width | 150mm |
| Effective stroke | 1200mm |
| Test speed range | 100-500mm/min stepless speed regulation and 5-speed constant speed
(special test speed can also be customized according to customer
requirements) |
| Displacement measurement accuracy | Within ±0.5% of indication |
| Breakpoint ratio setting | 0～99%, users can set proper break down time according to different
materials |
| Test bench safety device | Upper and lower stroke limit device |
| Overload protection | Over 10% of maximum load, automatic machine protection |
| Fixture configuration | Set of tensile clamps |
| Host size | 550×400×1820mm |
| Weight of host | About 100 Kg |
| power supply | 220V/50Hz |
