Stainless Steel Welded Wire Mesh With Mesh with Square/Rectangular
Aperture in Sheet / Roll
Stainless steel welded wire mesh is an extremely popular and
versatile item that many different customers use for many different
applications. Our specializes in supplying high quality stainless
steel welded wire mesh, available in both T-304 stainless steel and
T-316 stainless steel. Stainless steel welded wire mesh is
corrosion resistant, uniform in appearance and available from stock
or through custom manufacturing.
| T-304 Stainless Steel – Standard Chemical Composition (in %) |
| Alloy | Carbon [C] | Manganese [Mn] | Phosphorus [P] | Sulfur [S] | Silicon [Si] | Chromium [Cr] | Nickel [Ni] | Iron [Fe] | Others, if Applicable |
| T-304 SS | 0.08 Max | 2.0 Max | 0.045 Max | 0.03 Max | 1.00 Max | 18.00–20.00 | 8.00–10.50 | Balance | Nitrogen [N] = 0.10 Max |
| T-316 Stainless Steel – Standard Chemical Composition (in %) |
| Alloy | Carbon [C] | Manganese [Mn] | Phosphorus [P] | Sulfur [S] | Silicon [Si] | Chromium [Cr] | Nickel [Ni] | Iron [Fe] | Others, if Applicable |
| T-316 | 0.08 Max | 2.00 Max | 0.045 Max | 0.03 Max | 1.00 Max | 16.00–18.00 | 10.00–14.00 | Balance | Mo = 2.00-3.00, N = 0.10 Max |
| Mo = Molybdenum; N = Nitrogen |
The popular specifications featured here range in opening size from
approximately 4" to 1/4" with diameter wires that are commonly requested by the majority of
users. Many of these specifications are custom manufactured in
sheet form and in popular widths of 36”, 48” and 60" wide.
Of course, these specifications are commonly used in a wide array
of industrial and non-industrial applications, including animal
caging, critter and varmint control, agricultural use, air vents,
basket fabrication, food applications, aviary and bird screen and
industrial separation.
Residential do-it-yourselfers gravitate towards these specific
items because they offer tremendous value and versatility for
projects around the home. In most normal environments, stainless
steel will have a longer life cycle than a comparable galvanized
mesh.
Trim and Stub Options
We offers a variety of trim and stub options to suit your needs.
Contact one of our knowledgeable sales representatives if you’re
not sure which option is best for your project.
Trimmed: Minimum on all four sides approximately 1/16″-1/8″ long. Trimmed
flush (no stubs) must be specified when required.
Untrimmed Balanced Stubs: Equal stubs on opposite sides only. Stubs will not exceed opening
unless specified.
Balanced Stubs with Edge Wire: Equal stubs on opposite sides with welded edge wire. (Special
order only)
Untrimmed Random Stubs: Varies on all four sides. Results from shearing a larger sheet,
pieces will not be identical.
Trimme Untrimmed Balanced Balanced Stubs Random Untrimmed
| Specification List of Welded Wire Mesh |
| Opening | Wire Diameter |
| In inch | In metric unit(mm) |
| 1/4" x 1/4" | 6.4mm x 6.4mm | 22,23,24 |
| 3/8" x 3/8" | 10.6mm x 10.6mm | 19,20,21,22 |
| 1/2" x 1/2" | 12.7mm x 12.7mm | 16,17,18,19,20,21,22,23 |
| 5/8" x 5/8" | 16mm x 16mm | 18,19,20,21, |
| 3/4" x 3/4" | 19.1mm x 19.1mm | 16,17,18,19,20,21 |
| 1" x 1/2" | 25.4mm x 12.7mm | 16,17,18,19,20,21 |
| 1" x 1" | 25.4mmX25.4mm | 16,17,18,19,20,21 |
| 1-1/2" x 1-1/2" | 38mm x 38mm | 14,15,16,17,18,19 |
| 1" x 2" | 25.4mm x 50.8mm | 14,15,16 |
| 2" x 2" | 50.8mm x 50.8mm | 12,13,14,15,16 |
| 2" x 3" | 50mmx70mm | 2.0mm,2.5mm,1.65mm |
| 3" x 3" | 75mmx75mm | 2.67mm,2.41mm,2.11mm,1.83mm,1.65mm |
| 2" x 4" | 50mmx100mm | 2.11mm,2.5mm |
| 4" x 4" | 100mmx100mm | 2.0mm,2.5mm |
Technical Note:
1, Standard roll length: 30m; width: 0.5m to 1.8m
2, Special sizes available at request
3, Packing: in waterproof paper in rolls. Custom packing available
at request. |
