IEC61000-4-5 Lightning Surge Generator 1.2/50µs , 8/20 µs
Combination Wave Built-in CDN
1. Introduction:
Lightning surge generator is designed according to IEC61000-4-5 and GB/T17626.5,the lightning surge generator can generates both 1.2/50, 8/20 µs combination wave. The test voltage is up to 6KV, user can choose and define the
test levels. The parameters of waveform for surge voltage and
waveform for surge current is strictly meet the standard
requirements of IEC61000-4-5. It is widely used in the fields of
industry control equipment, house-holding appliance,medical
electronics, communications electronics,components, auto control
equipment and etc.
Lightning surge generator is to simulate the surge voltage caused
by switching transient and lightning transient, the surge test is
to found out the surge voltage effect to EUT in normal working
condition.
The Lightning surge generator is built in a 300V/10A coupling and
decoupling network.
EMC Test equipment includes: EMI receiver, ESD generator, surge
generator, electrical fast transient generator, voltage dips short
interruptions and voltage variatins generator, ring wave generator
and etc.
2. Features:
1). 7 inches LCD touch screen, with plentiful functions, easy to
operation and update the software.
User can design the test program, and has 1000 groups memories.
2). Monitoring the surge voltage and current waveform by work with
an external oscilloscope.
3). Built in single phrase 10A (16A) network, makes the equipment
smaller and convenient.
4). With high-strength plug in the panel, EUT can connect with the
equipment convenient and reliable.
5). Monitoring the work voltage and current of the EUT. Overvoltage
protection and overcurrent protection.
6). Intelligent test the surge output, warning at voltage error and
no output.
7). Intelligent judge the abnormal of high voltage and surge
output.
3. Parameters:
| Output voltage (open) | 6kV (Max) ±5％ |
| Front time | 1.2μs ±30％ |
| Time to half-value | 50μs ±20％ |
| Output current (short) | 3kA±5％ (max) |
| Front time | 8μs ±20％ |
| Time to half-value | 20μs ±20％ |
| Output polarity | Positive, negative, positive/negative automatically |
| Output impedance | 2Ω±10％ |
| Trigger mode | Synchronization,asynchronization |
| Inject phase | Freely set at 0－360°,resolution:1° |
| Trigger mode | Auto or manual, single |
| Surge times | 1-9999 times |
| Memories | 1000 groups |
| Surge interval | 20-9999s |
| Accuracy: | 5％ |
| CDN | AC:single phrase 300V,10A(16AMax),50/60Hz |
| DC:300V,10A(16AMax) |
| EUT power supply | AC110-220V±10％,50/60Hz |
| Coupling mode | L-N,L-PE,N-PE,L+N-PE |
| Working environment | Temperature:15°C－35°C humidity:0%－75% |
| Power supply | AC220±10％,50/60Hz |
| dimension | 470mm(W)×260mm(H)×500mm(D) |
| Weight | About 30kg |
