Automatic 5 Ply Corrugated Board Production Line Speed 60-80m /
min
Basic structure:
1, paper machine:
Hydraulic shaftless paper holder: 2 sets
Through the hydraulic transmission mode, the clamping, lifting and
automatic correction system of the paper roll is realized. The
hydraulic station adopts the production of Shandong Zaozhuang, the
air drum brake, the expansion chuck, and the top paper device to
meet the needs of the paper core. 3 inches, 7 inches.
2, 4 paper carts
The paper rails are 6 meters long and double channel steel butt
joints. The trolleys are driven by steel plates and optical shaft
iron rollers. The paper is stable and easy to operate.
3, flyover conveyor: 1 set
The flyover conveyor comprises a platform device, a guardrail
device, a roller device, and a frame device.
The guide rollers in the overpass conveyor are all 86mm in
diameter, chrome-plated on the surface, and the coating reaches 2
filaments. The frame is made of 140 (national standard) channel
steel to maintain the stability of the frame. The upper part of the
paper machine is equipped with a guide roller to facilitate paper
feeding.
5, the edge machine: 1 set
The opposite side machine consists of a 4-layer frame, a paper
guide roller with a 104mm chrome-plated roller, a center swing
roller diameter of 86mm, a pair of side systems using a hydraulic
oil and gas station, and a transmission device.
The main function of the edge machine is: automatic control of the
edge, alignment, and edge error: ± 1mm.
6, four online: 1 set
The four wires are composed of four hot rollers with a diameter of
400 mm and a frame, a paper guide roller, a heating device, a
distance device, a transmission device and the like.
The heating device is temporarily designed as an electric heating
device.
The guide roller has a diameter of 86 mm.
The surface of the heated roll is ground and hard chrome plated.
The temperature of the surface of the heat roller is made uniform.
The water content of the base paper before entering the glue
applicator is basically the same.
Parameter
| Design speed:100m/min | Normal work speed:60-80m/min |
| No. | Machine name | Qty | | | Remarks |
| 1 | Mill roll stand | 5 | | | Electric swing |
| 2 | Railing and tracks | 10 | | | |
| 3 | Single facer | 2 | | | Corrugating roller ￠280mm, electric adjust gluing width, pneumatic
control |
| 4 | Pre-heater | 2 | | | ￠600mm, electric adjust wrapping angle |
| 5 | Pre-conditioner | 2 | | | ￠600mm electric adjust wrapping angle |
| 6 | Bridge conveyer | 1 | | | Adsorption type, electric deviation-correcting |
| 7 | Triplex pre-heater | 1 | | | ￠600mm electric adjust wrapping angle |
| 8 | Gluing machine | 1 | | | Pneumatic adjust pressing roller |
| 9 | Double facer | 1 | | | Heating plants: 520mm×16, with cooling section |
| 10 | Slitter scorer | 1 | | | 5 blades with 8 scorers |
| 11 | NC cutoff | 1 | | | Helical knives Blade made in Taiwan |
| 12 | Cardboard feeing machine | 1 | | | |
| 13 | Main drive | 1 | | | |
| 14 | Glue making system | 1 | | | Automatic circle glue, pipeline provided by buyer |
| 15 | Electric system | 1 | | | |
| 16 | Steam system | 1 | | | Pipeline on valves provided by buyer |
| 17 | Pneumatic system | 1 | | | |
|
