Full Automatic Die Cutting And Creasing Machine Cardboard Cutting
Machine Introduction :
The KSMY-1100 Automatic Die Cutting and Creasing Machine is the
main equipment for making high-grade color box, plug and different
shapes of ink cartons.
Components and Features:
1. Fidek structure
Fidek structure: suitable for a variety of paper, high-speed
stability, and easy to adjust. ,4-8 reliable separation nozzle
means so that it is more stable and more accurate high speed.
2. Positioning part: the front guide, the side guide.
Front guide: The overall swing front swinging side guide have a
small impact on the paper edge, high positioning precision, with
four sets of precision fiber switch(Taiwan Riko brand) to check
paper in place and avoid paper wasting.
3. Die cutting part: grippers, die cutting sheet frame, die cutting
steel plate, transmission structure, host bottom platform, the
moving platform and the upper platform, intermittent structure,
pneumatic clutch brake.
Die cutting pressure can overall regulating and can also front
gripper edge regulating separately, manual reducer is convenient
and labor saving.
4. Paper collecting part: Collecting paper automatically and
quantitatively.
Back aligning paper, side aligning paper to ensure the automatic
paper feeding orderly, the structure of paper collecting machine is
simple, quick operation. Back aligning paper adjusted by electric,
three times faster than the manual operating, the operation is
simple and convenient.
5. Electric control part: Motor, PLC and man-machine interface,
electronic control system, all kinds of safety protection device.
Motor: With imported Fuji inverter stepless speed control
motor,makes the main motor saving energy, low noise. The paper
feeding and collecting reducer motor choose imported Taiwan
electromagnetic braking deceleration motor, with high safety
performance, long service life and low running noise.
6. Lubrication system: Forced lubrication system and timing
lubrication system.
Forced lubrication system: Oil pressure and flow rate adjustment is
convenient, make sure that the main drive oil supply normally and
will not off machine when running.
Technical Parameters:
| Model | KSMY-1100 |
| Die cutting type | Pressed flat die cutting(Lower side is movable while upper side is
unmovable) |
| Max paper transmitting size | 1100*780mm |
| Min paper transmitting size | 400*370mm |
| Max die cutting size | 1090*770mm |
| Min gripper size | 5mm |
| Max die cutting pressure | 300N/cm² |
| Paper processed | Ivory board | 0.1-2mm |
| Corrugated board | ≦5mm |
| Die cutting precision | ±0.1mm |
| Max die cutting speed | 6500 sheets/h |
| Max feeding pile height | 1100mm(above the level) |
| Min feeding pile height | 1100mm(above the level) |
| Total power | 17kw |
| Total weight | 17T |
| Overall size | 7650*2100*2100mm (Not including the pedal) |
Machine Picture :
