Ral color epoxy polyester spray powder paint for product finishing
Product introduction:
Powder coatings are mixed with a certain proportion of the resin,
fillers, curing agents and other additives, then prepared by hot
extrusion ,crushed and sieved.The products are stable at room
temperature storage, then baking heat melted and solidified to form
a smooth and bright permanent coating to achieve the purpose of
decoration and corrosion.
Applications of Product:
| ♦ Electrical Household Appliances | ♦ Aerospace Area |
| ♦ Automotive Electronics | ♦ Fitness Equipment |
| ♦ Track Traffic | ♦ Medical Devices |
| ♦ Petroleum Pipes, Valve | ♦ Tools & Hardware |
| ♦ LED Lights, Outdoor Lamps | ♦ Radiator & Heat Sink |
| ♦ Glass Decoration | ♦ External Facilities |
1.General introduction:
Powder coatings are mixed with a certain proportion of the resin,
fillers, curing agents and other additives, then prepared by hot
extrusion ,crushed and sieved.The products are stable at room
temperature storage, then baking heat melted and solidified to form
a smooth and bright permanent coating to achieve the purpose of
decoration and corrosion.
2.Feature:
1).The products are non-toxic, solvent-free and non-toxic volatile
substances,there are no intoxication, no fire, no "three wastes"
emissions and other pollution problems, in full compliance with
national environmental laws.
2). Raw material utilization is high, the highest utilization rate
even more than 99%.
3). After being pre-coated handle, disposable construction, without
primer,you can get a sufficient thickness of the coating, easy to
automate operation, high production efficiency, reduce costs.
4). Dense coating adhesion, good impact strength and toughness,
high coverage corners, with excellent resistance to chemical
corrosion and electrical insulation properties.
5).Powder coatings storage and transport are safety and
convenience.
3.Product series:
The products include high light ( above 86%),glazed
(76%-85%),matte(20%-50%),low light (below 20%). We also offer a
variety of shiny products according to the needs of users.
4.Powder physical properties:
Proportion : 1.2-1.8 (depending on the color and gloss ) .
Particle size distribution: 100% less than 125 microns (more than
85% between 60 to 90).
Liquidity(180°C):22~35mm.
Curing conditions:200°C,10 minutes.
5.Average coverage:
8-10m³/kg, the membrane is 60μm(calculate by 100% utilization rate
of powder coating).
Test:
| Test Item | Test Method | Test Result |
| Film Thickness | ISO2360 | 60-80um |
| Pencil Hardness | ASTMD 3363 | HB-H |
| Bending | ISO1519 | ≤10mm |
| Grid Test 1mm | ISO2409 | 0 Class |
| Impulse Test | ASTMD2794 | Pass |
| Cupping Test | ISO1520 | ≥8mm |
| Heat Resistance 1000 hours | ISO6270-1 | Popping<1mm |
| Salt Spray 1000 hours | ISO9227 | Corrosion Spreading<1mm |
Our advantage:
♦ Our Powder finishes are available in a vast range of colors and
finishes.
♦ Including metallic effect,chrome effect,wood grain,Candy Color
Powder ,MDF powder
and other special effect,making them ideal for indoor decoration of
steel furniture,
and outdoor metal products such as agricultural machinery, auto
parts
♦ Our products have a good storage stability ,salt spray
resistance,weatherability, exterior durability,
corrosion resistance,chemicals resistance, Highly Weather- and
UV-Resistant,and also Good heat flow.
Pack&shipping:
| Trade Terms | FOB, CIF, CRF, CNF |
| Payment Terms | T/T, L/C, West Union, PayPal etc. |
| Delivery time | 3-7 days after payment |
| Packaging | Size: 39*26*43 (unit:cm) Weight: N.W. 25kg G.W. 26kg |
| Shipping | By sea, by air, by courier |
