1.If waterproof riflescope can get access to water or not?
The riflescopes from us can keep working perfectly under water.
However, please note the fact that in order to lengthen the working
life, please dry it with lens cloth and put in moisture-free and
dry environment after getting wet.
Don’t put in humid environment for a long time. Keep Dry with
desiccant.
2.Use Scope Mounts Correctly
If the scope is always clipped very tightly, it may cause scope
tube deformation. You don’t need to clip the mounting rings too
tightly, you may check if the optics move away after ten fire. If
displacement, make adjustment accordingly.
After each shooting, loosen the screw of the mounts to let scope
relax so as to minimize the stress of the scope. The scope will
only be stressed while in use.
When you put away your rifles, don’t leave the rifles pressing on
riflescopes, because the heavy weight of the rifles will probably
cause damage to the mounts or the scopes. Don’t leave other items
pressing on the scopes neither especially the rifles and lenses
will got pressed or cause screw loosed in transit by shock and
bump.
3.Installation of Mounts
When you find the windage and elevation turrets have reached the
maxi limit but the deviation of bullet is big, please check your
mounting rings to make sure the scope is in the middle of the
mounting rings without no lateral force that cause unparallel of
axle wire of the scope and the rifle. Showed in the picture below,
the lateral force may cause the unparallel of the central point of
the mounting rings and the central point of the scopes and cause
impact error.
4.How to observe the parallax?
Parallax is a condition that occurs when the image of the target is
not focused precisely by misalignment of shooters eye on the
reticle plane. This condition exists in all scopes. Parallax is
visible as an apparent movement between the crosshairs and the
target when a shooter moves their head and changes eye alignment in
the scope.
The higher the magnification the more visible this is.
Without touching the rifle, move your eye around behind the scope.
If the crosshairs appear to move on the target, the parallax is not
set for the range of the target you are using.
SECOZOOM scopes equipped with an adjustable parallax knob can
correct this at all yardages.
This side parallax knob is located opposite the windage knob on the
other side of the scope for models with adjustable parallax. The
parallax will be fixed at 100 yards.
If your crosshairs move to the right on the target’s image when you
move your head to the left, the image place must be further away
than the crosshairs. To pull the image plane in, screw the
objective bell in (counter clockwise) so that the objective moves
closer to you.
In this set up, the image is essentially tied to the objective so
moving the objective 0.1mm moves the image 0.1mm. Adjust outward to
pull back.
5.If there is parallax, what can we do?
Adjust the scale marks of side focus knob identical to the sighting
range, for example, if your target is in 200 yards far away, adjust
your side focus to 200 yards.
6.The relation between the parallax and the eye relief?
There is no direct relation between the the parallax and the eye
relief.
Actually, even if you put your eyes within the eye relief, there
may still be parallax.
Because the parallax is caused by the relation between objective
lens and crosshair whereas eye relief is the relation between the
eye and eyepiece.
A zero parallax riflescope has no parallax at all yardages no
matter within eye relief or not and no matter there is lateral
deviation or not.
1.Are your company a manufacturer or trading company?
We are well-experienced manufacturer specialized in producing
binoculars,rifle scopes, monocular, spotting scope, astronomical
telescopes, optics accessories etc., for more than 15 years.
2.Does your product have any warranty?
Yes,we offer 5 years limited warranty for rifle scopes vs 2 years
limited warranty for other optical instruments such as binoculars,
monocular, spotting scope, astronomical telescopes, etc.,
Damage due to misuse, ill treatment and unauthorized modifications
and repairs are not covered by our warranty.
3.What's your payment method?
We usually accept the payment methods include T/T (Bank Transfer),
Western Union, paypal and MoneyGram. Payment methods can be
adaptable to your specific requirements.
For different countries, the payment methods we accept varies from
each other.
50% deposit in advance and 50% balance before shipping. Payment
terms can be negotiated.
4.What's your shipping method?
We provide comprehensive shipping methods.
For small quantity orders we ship by DHL,FEDEX, EMS/TNT Express
service which is the fastest. Postal ways are also acceptable for
small orders.
For large quantity orders we ship by Air or by sea, we can also
ship order to buyer’s cargo agent in China.
We provide DDP service to both express way and air and sea
shipping!
More Images
