APM 2.6 Flight Control Cable hirose DF13 20cm 4P/5P/6P RC Part lvds
Cable For Helicopter
-------What's the lvds cable?
Low-voltage differential signaling,or LVDS,also known as TIA/EIA-644,is a technical standard that specifies electrical characteristics of a differential,
serial communications protocol. LVDS operates at low power and can
run at very high speeds using inexpensive twisted-pair copper
cables.
Since LVDS is a physical layer specification only,many data
communication standards and applications use it but then add a data
link layeras defined in the OSI model on top of it.LVDS was
introduced in 1994,and has become popular in products such as
LCD-TVs, automotive infotainment systems,industrial cameras and machine vision,notebook and tablet
computers,and communications systems.The typical applications are
high-speed video,graphics,video camera data transfers,and general purpose computer
buses.Early on,the notebook and LCD display vendors commonly used the term LVDS instead of FPD-Link when referring to their
application,and the term LVDS has mistakenly become synonymous with
Flat Panel Display Link in the video-display engineering vocabulary.
Electrical Characteristics
| |
| Hirose DF13 Connector Series |
Pitch - Mating Interface: | |
| 2 to 15, 2*5, 2*10, 2*15, 2*20P |
| WG #28 to #32 (Max.OD:1.0mm) |
| |
| |
| |
| |
| |
| |
| |
Product Details:
Our Company:
1. RY Electronics has over 10 years of experience designing and
manufacturing custom cable assemblies and antennas in large or
small volumes depending on your needs.
2. Our manufacturing facilities can build just about many types of
custom cable assembly(LVDS cable/Flat cable/RF cable/wire harness)
as well as GPS/WIFI/ISM/GSM/3G/4G antenna and RF connectors.
Our advantages:
1. Quality control:most of products have UL CE ROHS, certificate.
ISO9001:2008.
2. Low MOQ:5pcs/10pcs/20pcs/50pcs,depends on different items.
3. Good After-Sales Service: we could offer technical support or
return service in short time.
4. 1 Year Warranty.
FAQ
1. How to choose a right cable?
A designer has to evaluate the determining system parameters such
as signaling rate, cable length, single-ended or differential
(balanced) signaling, point-to-point, multidrop or multipoint
configuration, noise margin, flexibility, costs.
2. What’s will impact the material you select?
Specific equipment, machine structure and environment
3. Why cable need to be shielding?
To reduce electrical noise from affecting the signals, and to
reduce electromagnetic
radiation that may interfere with
other devices.
4. What sort of cable need suggest to?
For long transmission lines, a braided or served shield is
recommended to ensure good isolation between the signal lines and
the environment.
5. What kind of cable is cheaper and easy to handle?
Multiconductor cables are cheaper and easier to handle than twisted
pair or coaxial cables, especially in terms of termination.
