OCS NC Series CNC Pipe Cutting Chamfering Machine Clamshell Cutter
Speed Adjustment
Profile:
This machine is specially prepared for welding and cutting of
pipeline before cutting. The end face is cut
flat and cutting groove. Can be processed in any part of the pipe,
processing wall thickness, various
shapes of the groove can be finished at one time, fast.
Advantages:
1. This equipment is specially designed for the installation of
large-diameter pipelines for nuclear power,
petroleum, natural gas, electricity construction, boilers and other
industries
2. This machine adopts high-speed tool steel cutting tool, which
can process various grades of carbon
steel, stainless steel, alloy steel and other pipe materials.
3. The complete cold cutting process will not produce any spark and
will not affect the material change at
all.
4. One time clamping, cutting and groove can be done at the same
time, saving time and improving
efficiency;
5. In the process of machining, the tool holder slide table can
feed automatically, and is engraved with
ruler, which makes the machining more accurate and the use more
convenient.
6. The device is light in weight, good overall rigidity, high in
precision and easy to operate.
7. This equipment adopts the structural features of two-lobe type,
with small radial clearance and light
weight, suitable for places with complex environment and small
space.
8. The device can be split in half. This structure is suitable for
cases where there are objects on both
ends of the pipe, which are difficult to disassemble or cannot be
disassembled.
Main Features:
CNC pipe beveling machine is a portable cutting and break as one of
beveling machine,
the aircraft light, small volume, easy to use is the best equipment
in the construction site,
applicable to the bulk of the pipeline cutting and groove, the
machine is equipped with high
power servo motor, stable performance, low noise, speed can be
adjusted.
This product is widely used in petroleum, natural gas, pressure
vessels, ships, chemical industry,
boiler, pharmaceutical, food, nuclear industry, pipeline
engineering and pipeline equipment
installation, equipment repair and other industries in the field.
OCS NC Series pipe cutting and beveling machine adopts servo
motor,make the machine more
powerful,more stable and low noise.Speed adjustment.
Lower axail and radial clearance,light weight suitable for working
at narrow and complicated site.
Can separate to two half,it’s easy for the pipe when two end not
open.
The machines do the cutting and beveling simultaneously.
Before you place order to us, please let us know the following
information:
1. The pipe I.D ,O.D.
2. Wall Thickness
3. The material of the pipe and the enviroment of the site and the
requirement of the end face.
4. Driven:Electric,pneumatic.
5. The type of beveling. The normally type is the v and U,if you
have any special requirement,
please let us know it,
Then it will be more convient for all of us to make an immediately
decision.
Technical Specifications:
| Model | working range(ID-OD) | wall thickness | Rotation Speed |
| OCS-230 | Φ80-230 | ≤30mm | 15 r/min |
Note:Non-standard machine are available according to customers'
requirement.
