OMRON R88M-G05030H-Z G-Series + NCF: Optimum positioning for up to
16 axes Integration with Omron Smart Platform
Overview
The OMNUC G Series AC Servo Drives (with built-in MECHATROLINK-II
communications support) are a series of Servo Drives supporting the
MECHATROLINK-II high-speed motion field network. When used with the
MECHATROLINK-II Position Control Unit (CJ1W-NCF71 or CS1W-NCF71), a
sophisticated positioning control system can be made easily with
one communications cable connecting the Servo Drive and Controller.
With realtime autotuning, adaptive filter, notch filter, and
damping control, you can set up a system that provides stable
operation by suppressing vibration in low-rigidity machines.
Features
Data Transmission Using MECHATROLINK-II Communications
When used with the MECHATROLINK-II Position Control Unit
(CJ1W-NCF71 or CS1W-NCF71), all control data between the Servo
Drive and Controller can be exchanged through data communications.
Since the various control commands are transmitted via data
communications, Servomotor‘s operational performance is maximized
without being limited by interface specifications such as the
response frequency of the encoder feedback pulses. This makes it
possible to use the Servo Drive’s various control parameters and
monitor data via a host controller, allowing you to unify the
system data control.
Suppressing Vibration of Low-rigidity Mechanisms during
Acceleration/Deceleration
The damping control function suppresses vibration of low-rigidity
mechanisms or devices whose ends tend to vibrate. Two vibration
filters are provided to enable switching the vibration frequency
automatically according to the direction of the rotation.
Furthermore, the settings can be made easily by just setting the
vibration frequency and filter values, and you are assured of
stable operation even if the settings are inappropriate.
High-speed Positioning via Resonance Suppression Control
The realtime autotuning function automatically estimates the load
inertia of the machine in realtime and sets the optimal gain. The
adaptive filter automatically suppresses vibration caused by
resonance. Two independent notch filters make it possible to reduce
the vibration of a mechanism with multiple resonance frequencies.
Command Control Mode Switching
Operations can be performed by switching between two of the
following control modes: Position control, speed control, and
torque control. Therefore, a variety of applications can be
supported by one Servo Drive.
Similar models
| R88M-G10030L | R88M-G20030L |
| R88M-G10030H-Z | R88M-G20030H-Z |
| R88M-G40030H-Z | R88M-G05030H-B-Z |
| R88M-G10030L-B | R88M-G20030L-B |
| R88M-G10030H-B-Z | R88M-G20030H-B-Z |
| R88M-G40030H-B-Z | R88M-G05030H-S2-Z |
| R88M-G10030L-S2 | R88M-G20030L-S2 |
| R88M-G10030H-S2-Z | R88M-G20030H-S2-Z |
| R88M-G40030H-S2-Z | R88M-G05030H-BS2-Z |
| R88M-G10030L-BS2 | R88M-G20030L-BS2 |
| R88M-G10030H-BS2-S | R88M-G20030H-BS2-Z |
| R88M-G40030H-BS2-Z | R88M-GP10030L |
| R88M-GP20030L | R88M-GP10030H-Z |
| R88M-GP20030H-Z | R88M-GP40030H-Z |
| R88M-GP10030L-B | R88M-GP20030L-B |
| R88M-GP20030L-B | R88M-GP20030H-B-Z |
| R88M-GP40030H-B-Z | R88D-GT01H-Z |
| R88D-GT02H-Z | R88D-GT04H-Z |
| R88D-GT08H-Z | R88M-GP10030L-S2 |
| R88M-GP20030L-S2 | R88M-GP10030H-S2-Z |
| Signal No. | Abbreviation | Name | Pin No. |
| 00 | READY | Servo Ready | --- |
| 01 | /ALM | Alarm Output | 15 |
| 02 | INP1 | Positioning Completed 1 Output | --- |
| 03 | BKIR | Brake Interlock | --- |
| 04 | ZSPD | Zero Speed Detection | --- |
| 05 | TLIM | Torque Limiting | --- |
| 06 | VCMP | Speed Conformity | --- |
| 09 | TGON | Servomotor Rotation Speed Detection | --- |
| 0F | INP2 | Positioning Completed 2 Output | --- |
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming
the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T.
When we received the payment, then we will start to prepare the
order for you asap.
3, We can according to your shipment to ship out the goods, Or we
also can help you to ship out the goods directly. And the tracking
number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5
days.
5. If you also have any questions, you can ask me any time, right
below is my contact.
FAQ
* Q: Do you provide a warranty for the goods?
A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any
problem, please contact with us, we'll provide a suggestion from
our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the
warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your
specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our
customers benefit ;
We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
