Media Support Grids Fabricated With Wedge Wire
Details of Media Support Grids Sieve
___________________________________________________________________________________
Wedge wire grids have maximum design flexibility, can be
constructed in a wide variety of shapes and sizes from a variety of
corrosion resistant alloys such as type 304, 316, 316L, 321, and
410S stainless steels, as well as nickel alloys such as C-276.
Any process or vessel requirements can be accommodated, such as
vertical or horizontal vessels, chordal or pie-shaped screen
segments, with or without manway or other ports in the screens
V-Shaped Slots | Openings shaped like a "v" that open toward the inside of the well
tend to allow the particles that are just barely smaller than the
width of the slot pass. In other shapes of openings, these
particles would get caught in the screen and clog it. |
Continuous Slots | The special design gives continuous slot opening across the
periphery and length of screen. |
Very Large Open Area | This design gives continuous slot and hence the% open area for
water to enter is more than 2 times that of conventional slotted
pipes of any size and slot opening. This allows more water to enter
at much lesser frictional head loss and the efficiency of tube well
is improved appreciably. |
Better Sand Filtration | Due to specialize manufacturing process, wide range of slot opening
is available down to 0.15mm to allow proper slot selection
depending upon the size of sand in particular area. This gives
better sand control and reduced pump maintenance and longer tube
well life. |
Energy Saving | Due to reduce frictional head losses and increased discharge, the
pump load reduces the power required to pump same quantity of
water. Power saving of around 20-25% is observed. |
.
Specification of Media Support Grids Sieve
___________________________________________________________________________________
Normal Name | Lauter Tun Screen, Mash Tun Screen, False Bottom Screen, Etc. |
Diameter Range (MM) | 200mm To 2500mm. Diameter Customized |
Normal Diameter (MM) | 29”, 30”, 35”, 37”, 40”, 45”, 47”, 59”, 63”, 74”, Etc |
Normal Slot (MM) | 0.7mm, 0.75mm, 0.8mm, 1.0mm, customized |
Normal Thickness (MM) | 8.5mm, 20mm. 25mm, 30mm, 40mm, 50mm, Customized.
|
Sections & shape | 1 Cycle, 2 PCS, 3 PCS, 4 PCS, 6 PCS, 8 PCS. Customized |
Wedge wire (MM) | 2x4MM Wedge Wire, 3x5MM Wedge Wire |
Support Rod (MM) | 3x5MM V shaped Support Rod, 3x5mm Square Support Rod |
Strengthen Rod (MM) | Thickness and Height according to the diameter and screen thickness |
Note | Usually customized. |
Applications of Media Support Grids Sieve
___________________________________________________________________________________
water treatment equipment
environment protection
the sea water desalination
water softening treatment
oil and chemical processing
terminal filtration for petroleum products
filtration for chemical acid and soda liquid
alcohol and other organic solvents recycle filtration.
images of Johnson wire sieve
___________________________________________________________________________________
