Lever Factory Directly Sell Continuous Single Bending Glass
Tempering furnace
| Model | Max. Glass Size (mm) | Min.Glass Size (mm) | Thickness (mm) | Min.Radius (mm) |
| LV-TB1206L | 1200 x ⌒600 | 150 x 280 | 3～19 | ≧550 |
| LV-TB1608L | 1200 x ⌒800 | 150 x 280 | 4～19 | ≧550 |
| LV-TB2010L | 2010 x ⌒1000 | 150 x 280 | 4～19 | ≧1000 |
Main Technical Features:
Loading Table:
1. Equipped with LED light to detect the glass with defects.
Heating Section:
1. Non-reciprocating moving, continuous type, higher productivity,
better quality. (only for vey big productivity, 8 working
positions)
2. Sectional heating, individual heating zones for each working
position.
There are ceramic plates to divide the different heating zones,
3. There are ceramic plates at the top of oven, which could ensure
more even heating, avoid dregs falling. But the cost is higher and
has higher requirements on the installation.
4. The ceramic rollers system is driven by triple belts, which can
ensure better simultaneous and stable running, and avoid the
scratch and destroy of glass when above the rollers. It would not
affect the running when any one of belt damaged. The design as
below picture:
5. Same top quality insulating materials for whole heating oven
6. Heating elements use the gapless design (parallelogram shape),
which could make the heating more even. This could improve the
finished product rate and better product quality. The design as
below picture:
7. Using ceramic support for heating elements, which could avoid
earth to avoid heater trouble
Forming section:
1. Easy replacement for rollers
Control System
1. PLC, inverters. Contactors: Siemens
2. Network data for servo motor control mode: Profinet, compared
with traditional wiring-connection, this mode could reduce
disturbance
