Portable Sea Water Desalination Equipment/Water Treatment Plant
with Ro System
1.Reverse osmosis membrane:
At present, the roll-type reverse osmosis membrane is the most
important component of reverse osmosis. The membrane element is
similar to a
long envelope-like membrane pocket, and one side of the opening is
bonded to the product water center tube containing the opening, so
that
the feed water flow flows from the outside of the membrane. Under
the pressure of the liquid material, the light liquid material
enters the
membrane pocket through the membrane and then flows into the
central tube of the product liquid material, and a drainage layer
and a support
layer are arranged between the membrane sheets. According to
different properties of the material, the membrane sheet is It is
divided into
wide channel and narrow channel. The working pressure is up to
5.0Mpa. It has strong anti-pressure and anti-pollution properties,
is not easy
to block, and can run continuously for a long time. The whole
process has good separation effect, simple operation and good
regeneration
performance.
2. Water ro system Roll reverse osmosis system:
The reverse osmosis system can be assembled in series and in
parallel by single or multiple reverse osmosis modules, and can be
assembled
into large devices for various purposes. Reverse osmosis systems
are generally classified into a concentrated type and a separate
type
depending on the purpose of use. According to the production scale
and product quality requirements, it can be divided into two types:
continuous type and intermittent type, and can be configured in
different stages and sections. A complete reverse osmosis device
generally
consists of three parts: pretreatment of raw liquid, reverse
osmosis membrane module, pump valve, pipeline and electrical
control.
More pictures :
