Shoe Cleaner With Light And Absorbent For Sponge Biology Laboratory
Working life: 7 years at least.
Product quick detail
1. Good water resistance, Alkaline resistance and acid resistance.
Combustible, black smoke, melted and dripped with a special smell.
2. PVA super-absorbent material is a polymer material that can be
biodegraded in the natural environment, with great development
potential and market prospects.
3. The sponge is rich in unacetalized hydroxyl groups and has
certain flame retardant properties after wet water.
4. The staff put on flat-bottom dust-free shoes (anti-static shoes)
and stepped on the cleaning area.Then step on the strong absorbent
cotton, blot the water stains left by the soles, and finally enter
the air shower or workshop.
5. The sensor automatically senses the human body and starts the
machine, scrubbing the soles, such as dust, mud, etc.And cleaning
time is about 3 to 5 seconds.Then step on the water absorption zone
of the machine to strongly damp the water stains that may remain on
the sole during the cleaning process.
6. Sole cleaning machine has the advantage of being safe to use and
easy to operate.
Product Advantage
1. The machine cable and interface of the pipeline can be installed
on the left or right side of the machine, according to customer's
requirements.
2. When the machine is in standby and running, the height position of
the water level is monitored in real time to ensure the safe use of
the machine.
3. The base material of the machine is made of aluminum alloy, which
has superior compressive performance.
4. Automatic induction control. When the personnel are close, the
equipment automatically starts working and leaves the automatic
stop work, which can effectively save energy, reduce mechanical
loss, prolong service life, eliminate the need for special care,
and reduce management costs.
Specifications
| Model | HARDWORK NO.1 |
| Power supply | AC220/110V(option) 50/60HZ (standard 24V dedicated power supply) |
| Width indicator lamps | LED blue light (default), violet light (with UV disinfection
function , optional) |
| Drainage method | Direct drainage |
| Material | Aluminum alloy , plastic , 304 stainless steel |
| Panel color | Default black, other colors can be customized |
| Pipeline interface location | Optional left and right |
| Size: | Width:76cm , height: 8.5cm on both sides , cleaning area height:
2cm , water absorption area length: 57.6cm , cleaning length can be
customized. |
Conditions of Use
1.Ambient temperature: 0-40°C .
2.Supply water temperature: 0-30°C .
3.Water pressure :2-6KG/CM² .
4.The floor must be horizontal and sturdy when installed, besides ,there is no pit ,no tilt .The bottom of the machine must be completely in contact with the ground , no gap.
5.It is strictly forbidden to move and lift the machine before
draining the water inside the cleaning machine.
6. When in installation, the whole machine should be balanced force
during the lifting, and no press can be applied to the surface of
the machine during the lifting.
Product Description
The high-tech sole cleaning machine manufactured by Jiebang
Electric is the simplest way to clean your shoe sole with water to
solve the problems of sole cleaning.
HARDWORK sole cleaning machine is fully intelligent with automatic
water change , automatic sewage discharge, and accompanying washing
. It is the most convenient, reliable and eco-friendly way to
remove dust and dirt particles from soles before it enters a clean
area.One time investment, long-time benefit. It also can reduce the
cost of the production. It can be installed on different entrance
of the workshop, block the dust out of the workshop, and protect
the environment.
HARDWORD soles cleaning machine can provide soles cleaning solution
for laboratories, operating rooms, pharmaceutical factories, food
factories, air shower rooms, dust-free workshops .
Intelligent work, automatic sensors, save the energy , reduce the
cost.
Working principle
1.When a person pass through the machine , the brush rotates, and
the adjacent two brushes rotate in opposite directions ; The foot
is stepped on the brush pedal to achieve the purpose of cleaning
the sole . Automatically changing water and automatically
discharging dirt .
2.The cleaned shoes can be sucked dry when they are placed on a
high-performance absorbent sponge.
Conditions of Use
1.Ambient temperature: 0-40°C .
2.Supply water temperature: 0-30°C .
3.Water pressure :2-6KG/CM² .
4.The floor must be horizontal and sturdy when installed, besides ,there is no pit ,no tilt .The bottom of the machine must be completely in contact with the ground , no gap.
5.It is strictly forbidden to move and lift the machine before
draining the water inside the cleaning machine.
6. When in installation, the whole machine should be balanced force
during the lifting, and no press can be applied to the surface of
the machine during the lifting.
Packing: wood case
Skype: 86-19936133523
Contact person: Helen Won
Email: hrong0821@gmail.com / hrong0821@163.com
