Plastic Case Wall Mounted Instant Hot Water Dispenser Red Color
Touch Screen
Products simple description :
Thank you for using the new generation multifunctional rapid heater
Wall-mounted instant boiling water heater GWS-8B24 has following
functions and features:
(1) Cooling function, temperature low as12 ℃
(2) Water output within 3 seconds, boiled water without waiting
(3) Touch screen, user friendly
(4) Intelligent program control; output water with required
temperature and volume, operation simplified.
(5)Fashionable and exquisite appearance, high quality.
(6) 3 steps of boil dry protection in sequence, liquid level alarm,
thermal resistor, and temperature control.
Technical Parameters:
| Voltage | 220V~ |
| Frequency | 50Hz |
| Power | Heating: 2130W Cooling: 70W |
| Input Water Source | Purified/Filtered Water |
| Input Water Pressure | 0.1-0.4Mpa |
| Working Environment Temperature | 5℃-38℃ |
| Working EnvironmentHumidity | ≤ 90% |
| Water Heating Capacity | 20L/h (≥90°C) |
| Power Consumption | ≤0.1kW·h/24h |
Working Process and Process Flow:
Products operation :
- Afterinstallation and get charged, the indicator will show as “FO”,
which means “no water”. Touch any button to pump up water. The
inner-cooler real-time temperature will show on the monitor. If no
actions in 60 seconds, the machine will turned into “locked mode”
and the “LOCK” indicator will be on. Another 60 seconds will turn
the machine from “locked mode” into “sleeping mode”.
Instructions for Function Buttons :
- LOCK: When on, cooling and heating functions will not work. Touch “LOCK” for 1 second before using other function buttons.
- COOLING: Touch “COOLING” to have the machine working in “cooling
mode”, in which the indicator is in orange. Until the inner-cooler
temperature reaches 12 ℃, the function will automatically stop,
then the indicator is in green. Or you can touch “COOLING” whenever
you want to stop the work.
1.COLD: One touch will release around 150ml cold water, or you can
stop it whenever by touching it again. The LED monitor will show
the real-time temperature inside the inner cooler.
2.HOT/150ml: After touching, the heater starts to work and the LED
monitor will show the real-time temperature inside the heater. Once
the temperature reaches 99℃, 150ml water will be released from the
outlet. Or you can touch “HOT/150ml” whenever you want to stop the
work.
3.HOT/250ml: After touching, the heater starts to work and the LED
monitor will show the real-time temperature inside the heater. Once
the temperature reaches 99℃, 150ml water will be released from the
outlet. Or you can touch “HOT/250ml” whenever you want to stop the
work.
CAUTION: Please do touch the outlet when the machine is releasing
hot water(99℃).
Products photo as following:
Daily Maintenance:
- Do not place any part of this dispenser in water or any other
liquid.
- Place the dispenser away from direct sunlight.
- Keep the dispenser out the reach of Kids.
- Don’t remove the cup when hot water is streaming out.
Organic media is not allowed to be used for cleaning the surface of
the machine.
Contact details:
NINGBO GOOD WATER SOURCE ENVIRONMENTAL PROTECTION ELECTRICAL
APPLIANCE CO.,LTD
Contact person: Jack Liu
Contact phone: (86) 13884494576
Skype: jackliu06316
Wechat: Jackliu8886
