IPX8 Pressure Immersion Test Device-positive and negative pressure
Standard:
IEC60529 degree of protection provided by enclosures (IP Code) of
the IPX8, IEC60884-1, IEC60335-1, IEC60598-1.
Application:
It is used for the testing of IPX8. Mainly used in Diving lighting
field- Underwater lamps (such as fishing lights), diving
flashlights and other lighting industries, Diving photography
field- Underwater ROV robots, diving cameras, etc., Military
equipment field- Submarine components (such as metal sensors),
underwater metal detectors, etc.
Major function:
1. By applying compressed air, push the pressure to water to
simulate the corresponding test environment. (Positive pressure)
2. The pressure difference between the inside and outside of the
product shell is obtained by pumping the air above the water
surface, and use the pressure to test. (Negative pressure)
Features:
1. Applicable to the IPX8 waterproof rating test of the product.
2. The tank body is made of 304 stainless steel material,
high-precision overall sub-arc welding, good pressure bearing.
3. The equipment is equipped with a safety valve. After the rated
pressure is exceeded, the pressure is automatically released to
prevent the operator from operating improperly and the set pressure
is too high.
4. The electronic control components using imported brands (such
as: LG, Panasonic, Omron, etc.); pneumatic components using
Taiwan's original AirTac, to ensure the stability of the use of
equipment and service life.
5. The test time can be set to: 0-999 minutes. When the test time
is reached, the pressure can be automatically stopped, and the air
inside the tank can be automatically drained. The tester can open
the can lid and take out the test sample.
6. Pressure display: The digital pressure gauge is used to
automatically control the test pressure inside the tank.
7. The base of the equipment is equipped with 4 movable brake
casters for easy movement and fixing.
Parameters:
| Model | HC-IPX8-50A-200L |
| Inner size | φ700 x H600mm |
| Outer size | 1000x1000x1400mm |
| Wall thickness | 4mm |
| Flange thickness | 20mm |
| Range of test depth | 0-50m |
| Range of test pressure | -0.08~0.5Mpa / -0.8~5bar |
| Vent pressure of safety valve | 0.55Mpa |
| Pressure control mode | Automatic control by pressure sensor |
| Pressure display mode | Pressure sensor |
| Pressure setting accuracy | 0.001Mpa |
| Test time | 0-999mim |
| Power | AC220V, 50Hz, 100w (customizable) |
| Protector | Leakage protection, short circuit protection, water shortage
protection |
