Ribbon Blender(also called ribbon mixer) consists of a U-shaped
horizontal bucket and a specially fabricated ribbon agitator. The
agitator rotates with minimum wall clearance in a U-shaped vessel.
A ribbon agitator consists of an inner and outer ribbon which
effects a counter flow mass movement with random motion in radial
and axial directions: the outer ribbon moves materials in one
direction and the inner ribbon moves the materials in the opposite
direction. The ribbons rotate and moves materials both radially and
laterally to insure thorough blends in short cycle times.
Feature:
1. Multiple application: it can be used for mixing feed, food
additives, binder, silicone rubber, pigment, printing ink,
paraffin, resin, vanishing cream, ointment, detergent, etc; and
also can be used for mixing viscous fluid and thick, pasty and
granular materials.
2. High homogeneity: this kind of single shaft design reinforces
convection, shearing, and mixing effects.
3. Human friendly: simple and reasonable structure, convenient
maintenance, reliable, safe, effective and less investment. The
mixer also can be equipped with jacket to facility heating and
cooling materials. At the same time, thermal insulation materials
also can be installed as required.
4. Moderate mixing and high uniformity, no segregation.
5. Used for mixing of: powders with powders; powders with liquids
6. Large open layout, a quick feed, little residue, to meet the
needs of adding the liquid.
Main Purposes of Using Feed Mixing Machine
- To distribute materials with different characteristics as evenly as
possible. A new homogeneous material with different properties
results.
- Adding water during the mixing process to help improve stability of
particles. Pellets made by high moisture particle sizes are with
low hardness, squishy and good palatability,
- Adding grease in the mixing powder to prepare for decreasing the
hardness of feed pellets.
Main Technical Parameter of SHW Feed Mixer:
| Model | LHY0.3 | LHY0.5 | LHY1.0 | LHY2.0 |
| Capacity | 150kg/batch | 250kg/batch | 500kg/batch | 1000kg/batch |
| Material | Carbon steel |
| Power | 1.5kw | 3/4kw | 7.5kw | 11kw |
| Rotation Speed | 33r/min |
| Mixing Time | 3-6min |
| Mixing Uniformity | ≤7% |
| Appearance | 1580*700*1180mm | 2000*750*1300mm | 2300*1000*1900mm | 2700*1150*2100mm |
