2W200-20 3/4 Inch Pipe Size Brass Body 2-Position 2-Way Normally
Closed Flying Leads Solenoid Fluid Control Valve
Description of Solenoid Valve 2W200-20
Product Features:
1.Indirect acting (internal pilot) and normally closed type 2/2 way
solenoid valve. It can change direction quickly and has large flow.
2.It is compact, small and lightweight. It is easy to install and
dismantle;
3.The valve body is made of brass. Its coil has a heat resistance
classification of Class B. The standard seal material is FPM-F.
Please contact us if other material is required.
4.The protection class of the is IP65 and there is a choice for
grommet or terminal electrical entry.
Dimensions of Solenoid Valve 2W200-20:
Additional Informations of Brass Water Solenoid Valve 2W200-20:
| Acting Type | Piloted, Normally Closed |
| Actuator Size | |
| Product Series | 2W: brass fluid control valve |
| Brand | BRANDO |
| Body Material | Brass |
| Orifice Size | 20mm |
| Port Size | 3/4" |
| Thread Type | G |
| Valve Type | Single Solenoid, 2 Port (2 Way), 2 Position |
| Voltage | AC 220V |
| Electrical Entry | Terminal |
| Pilot Type | Internal |
| |
Technical Parameters of Brass Fluid Control Valve 2W200-20:
Model: 2W200-20
Working Medium: Air,Water,Oil,gas
Operation: Direct Acting
Acting Type: Normally Closed
Orifice Size(mm): 20
CV Value: 4.8
Port Size: 3/4″
Operation Fluid Viscosity: 20 CST Below
Operating Pressure: Air:0~1.0Mpa, Water:0~0.7Mpa, Oil:0.9Mpa
Max. Pressure Resistance: 1.0Mpa
Operating Temperature: NBR for -5 ~80℃ and VITON for -5~150℃
Voltage Range: ±10%
Material of Body: Brass
Material of Oil Seal: NBR or VITON
