Snoscoot Snowmobile Rubber Track 305X103.7X20 Overall With 20 Drive Lugs Length 2074mm 20 Link

Snosc0ot Rubber Tracks with 20 drive lugs and length 81.6 in

• 81.6 in for Snoscoot, 89.7 in for Snosport

Introduce

Our Rubber Track are made from natural rubber. It possesses very good properties of wearing resistance and non-disintegration etc. The adhesion between the rubber and the steel frame is very strong, in addition the replacement is convenient and the service life is long, it is suitable for various snow mobiles

Width is the track size across the track.
Narrower tracks have lighter weight than wider tracks, but wider tracks have better traction and flotation in soft and deep snow than narrower ones.

Lug height, measures from the top side flat surface of the track to the top of the lug. More lug height will have better traction — as little as a quarter inch of extra height can make a substantial difference in acceleration and braking.

Drive pitch is the distance from one point on the track lug to the same point on the next lug. The most used pitches are 2.52", 2.86", 3". Common phrases are "2.52 pitch" and what this means is that the track lugs are spaced out so that there is 2.52″ from a common point on each lug to the next.

LENGTH is the track circumference. Length = Drive pitch x numbers of track segments. Shorter tracks have better handling performance than longer tracks, but longer tracks have better flotation.

The characteristics

1. Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft ground than steel tracks
2. A benefit to equipment operating in congested areas, rubber tracks make less noise than steel tracks
3. Rubber tracks permit machines to travel at a higher speed than steel tracks
4. Rubber tracks insulated machine and operator from vibraion, exteding the service life of machine and decreasing operator's fatigue
5. The ground pressure of rubbr tracks equipped machinery can be fairly low, about 0.14-2.30 kg/m2, a major reason for its use on wet and soft terrain.
6. The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled vehicles of the same weight.
7. Rubber tracks' pulling performance being twice that of wheels, it permits the lighter vehicles equip with rubber track to do the same pulling work than that of wheeled vehicles.


The notices of using rubber tracks

1. Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm when the machine is lifted. Readjust when the tension decreases. (Be careful because the rubber crawler may come off if the tension is too low).
2. Avoid projection from the frame around the rubber crawler, especially on its inner circumference. (Rubber crawlers are easily deformed; If it comes into contact with the frame, an accident such the rubber being cut can occur).
3. Avoid sharp projections when traveling.
4. Avoid turning too fast on concrete roads with a high coefficient of frction because this can cause accidents such as cutting the rubber.
5. Be careful that no oil, etc adheres to the rubber track. If it does, wipe it off immediately.
6. When storing for long periods, keep indoors, away from direct sunshine and rain.
7. Replace as soon as possible when abrasion of sprockets is observed

Producing workhouse

​

Shanghai Puyi Industrial Co., Ltd is one of the rubber material supplier in China, and rubber tracks factory in Shanghai, China.

We mainly deal with all kinds of rubber tracks and sell to all over the world!

Rubber tracks complete specifications, advanced technology, reliable quality, can be widely used in construction machinery, agricultural machinery, and snow: CAT, bulldozer, excavator, asphalt paver, (mini) harvester, snow blower, snow, wheelchair, robots, etc. Product quality qualified rate of more than 99.7%.

Its products are exported to Europe, America, Australia and southeast Asia, won the domestic and foreign user' S consistent high praise!

At the same time, we can provide you with other rubber products, rubber tracks, rubber tire (including solid tyre and pneumatic tyre), rubber mat, rubber crawler system.

The company has solid technical strength and complete testing methods, and implement strict quality evaluation from the incoming raw material to finished product delivery. Advanced testing equipment, complete quality guarantee system and scientific management methods to ensure product quality.

We believe, not good price, strive for a good service, things should be the opposite.

Sincerely welcome customers at home and abroad to negotiate business, to create a brilliant future!

We will take the science and technology innovation as the core, continuously consolidate and expand the market, with a more spectacular. "Quality first" is our company' S most important policy.

We will strictly follow the ISO9001 international quality standard keep the same industry leading product quality, and win good reputation both at home and abroad.

In order to promote the company' S image, in the case of strong business competition, we should develop the socialist spiritual civilization construction of the socialist direction, carry forward the yu passion, innovation, integrity, cooperation, make the staff can meet the needs of new aera.

Our company supplys different kinds of Rubber products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.