220 / 240v Ac Pulse Jet Valves For Dust Collector Baghouse Cleaning System

Goyen Type T Series CA25T 220/240V AC Voltage Dust Collector Baghouse Cleaning System Application Pneumatic Pulse Valve

CA25T Pulse Valve Diaphragm/Solenoid Activation

Dust Collector Pulse-Jet Valve Operating Sequence:

1. Differential pressure (DP) builds across the filter bags/cartridges as dust load increases in the collector.

2. Once DP reaches a pre-set point, the pulse-jet cleaning system is activated to go through a cleaning sequence/cycle, as programmed in the timer board or other controller.

3. The timer board (or other controller) then sends an electrical signal to the pilot solenoid valve(s), causing the coil to energize, thus pulling the valve plunger into the open position allowing the compressed air in the pneumatic line to bleed to atmosphere. (NOTE: The pilot solenoid valve can be direct-mounted (mounted directly on top of the diaphragm valve, or it can be remote-mounted (mounted in a solenoid enclosure separate from the diaphragm and connected with pneumatic tubing, as shown above.)

4. Bleeding the compressed air line to atmosphere causes an imbalance in air pressure within the diaphragm valve. In other words, the air pressure suddenly drops on the top-side of the diaphragm valve as the pneumatic line is bled to atmosphere.

5. The change in pressure difference within the diaphragm valve causes the compressed air manifold (compressed air tank) to force the diaphragm up from its seat, thus allowing compressed air to bypass the diaphragm and be expelled into the blow-tube. The “pulse” of compressed air then blows the dust off of the filter bags/cartridges.

6. The coil is quickly de-energized which causes the plunger to return to the closed position. Compressed air then bleeds through the diaphragm valve until the point where pressure is equalized on both sides of the diaphragm. Equalization of air pressure inside the diaphragm causes the diaphragm to reseat (return to closed position). The pulse cycle is then completed.

Pulse Cleaning System Components

Diaphragm Valve CA25T Operation:

Mechanical Details of Goyen Type Pulse Valve CA25T:

Pulse Valve CA25T Dimensions:

Pulse Valve C25T Installation:
1. Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4, Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on