High Accuracy Dynamic Tuned Gyroscope For Land, Sea, Aviation,
Space-flight Transporter
Feature
- High accuracy
- Long service life
- Wide dynamic range
- High reliability
Introduction
KTG-58 has been used for water surface, land strap-down system,
fast true-north seeking, television antenna tracker, and widely
used in spaceflight strap-down inertial system. The gyroscope also
can be used for land, sea, aviation, space-flight transporter,
strap-down platform attitude system.
Parameter
| Parameter | Spec. | Value | Unit |
| Power | Power(3 Phase) | 10&205 | V & Hz |
| Power(1 Phase) | 7&8000 | V & Hz |
| performance | Random Drift | ≤0.01 | °/h |
| Drift stability | ≤0.3 | °/h |
| Non-linear | ≤0.5 | %FS |
| Max tracking Rate | ≥100 | °/S |
| Non-G-Sensitive Drift | ≤15 | °/h/g |
| G-Sensitive Drift | ≤8 | °/h/g |
| Band Width | ≥70 | Hz |
| Torquer Scale Factor | ≥680 | °/h/mA |
| technological | Sync rate | 6015 | r/min |
| Sync Time | ≤10 | S |
| Output gradient | 7~10 | mV/` |
| Primary torquer | 19±3 | Ω |
| secondary torque | 2±0.5 | Ω |
| Physical | Weight | <350 | g |
| Dimensions | Φ35.4×78 | mm |
| Flange | 38×38 | mm |
Working environment | Temperature | -20~120 | ℃ |
| Vibration | 5 | g |
| Shock | ≥50 | g |
Installation
Products should be installed to ensure that X (Y) axis and the
measurement reference axis coincides, installation error should be
less than 5 '.
Operation
- Only products matching the appropriate power and locked loop
circuit board in order to work properly, need circuit board, please
explain in advance.
- When the product under normal use, you should turn on the power to
start the motor, about 20s, and then the on-lock loop, so that the
products in closed loop state; shutdown, disconnect locked loop so
that the product is in the open-loop operation, and then disconnect
power supply.
- Product energized, shut down in 40s, should avoid shaking the
product, the installation process should be light, light up, the
product non-collision, percussion.
- Product in the use of the process is strictly prohibited to pull
the plug.
- Product in the use of the process, can`t short circuit between
external power supply.
- Abnormality occurs during use, should immediately turn off the
power, fault isolation, if the product internal fault, the customer
shall promptly notify my company, my company organized by the
repair.
Dimension
Socket (J30J-15T) definition
Connector definition
The socket type:J30J-15T (cable length160~175mm)
| Pin No. | Function definition | Remark |
| 1 | Signal output of X-axis | |
| 2 | GND | For Excitation power and signals |
| 3 | X-axis torque coil(the end) | |
| 4 | A phase motor driver power | There-phase 10V, 205Hz |
| 5 | Sensor excitation power supply | Singal-phase7V,8KHz |
| 6 | Signal output of Y-axis | |
| 7 | Y-axis torque coil(the beginning) | |
| 8 | B phase motor driver power | There-phase 10V, 205Hz |
| 9 | DC＋15V | Power for Preamplifier |
| 10 | DC－15V | Power for Preamplifier |
| 11 | X-axis torque coil(the beginning) | |
| 12 | NULL | |
| 13 | NULL | |
| 14 | C phase motor driver power | There-phase 10V, 205Hz |
| 15 | Y-axis torque coil(The end) | |
NOTE: The same applies to J30J-21T, if use other socket, please
explain in advance.
Company profile
Xi'an Kacise Optronics Co., Ltd. was founded in 2000, is located in
Xi'an, Shaanxi Province, China, is a professional engaged in
instrumentation and sensors, R & D, production, sales as one of
professional high-tech enterprises, we have our own production
workshop and central laboratory. Factory building area is about
3000 square meters, with production of more than 30 employees, 8
engineer, 6 inspectors, 10 sale man, 5 for customer service, is
this industry, we are one of the strong technology manufacturers
with varieties specification.
When the company set up, we began to focus on the coordination of
military supplies production, achieved GB/T19001-2008/ISQ9001:2008,
GJB 9001B-2009 certification. When our company is running mature
and stable, in 2008, we began to develop our business. Based on the
production of military products quality control, we developed a lot
of sensor products, such as a pressure sensor / transducer /
sensor, level transmitter / ultrasonic level meter / ultrasonic
flow meter, inertial navigation products, IMU, gyroscope,
accelerometer etc.
We have the key technology and development center of advanced
sensors, and we cooperation with Northwestern Polytechnical
University, Xi'an Jiao Tong University and other colleges and
universities.
Product quality is the life of enterprise, customer demand is our
existence!
