ATS HB00 Human Body Electrostatic Eliminator/Touching Electrostatic
Eliminator
Instructions
Medical research has proved that the accumulation of human body
electrostatic is harmful to health, there are some people who are
allergic skin, heart rhythm disorders, have a headache the symptom
such as insomnia and irritability; Still others bristling, nervous,
afraid of contact with metal objects. In addition, when the
accumulation of human body electrostatic touch computer can make
the computer crashes, electronic breakdown, flammable gas fire and
explosion and other major hazards.
ATS HB00 type human body static eliminator is a new static
electricity product, which design for petrochemical industry and
electronic industry. It can quickly and efficiently eliminate human
body static electricity. Its characteristic is Small volume, light
weight, no power supply, easy installation, eliminate static no
feeling, etc.
Execution standard
ATS HB00 type human body electrostatic eliminator subject to the
following national standard design and manufacture
GB12158-2006 “Prevent electrostatic accidents general guidelines”
GB5074-2002 " Code for design of oil depot "
SH3097-2000 “Code for design of Petrochemical electrostatic
grounding”
Usage occasion
For your safety, you are advised to use human body electrostatic
eliminator in the following places:
1.oil depot and railway oil platforms, tank storage escalator
entrance, and the terminal entrance etc.
2.Electronic workshop, computer room, lab room entrance, aviation,
paint room entrance, etc
3.Gas station oil discharge site, self-help station entrance,
automatic tanker and so on
4.Other eliminate human body electrostatic operations place.
Stationary type
Technical indicators
1.ball material: stainless steel(202/304)
2.Releasing current: ≤0.1mA
3.Static electricity releasing time:≤1S
4.Environmental humidity:≤80%(40℃)
5.Environmental temperature::-40℃~60℃
mechanical parameters
1.touching ball diameter: Φ100mm
2.pole diameter: Φ63mm
3.pole wall thickness: 1.0mm
4.Product total length:1150mm
5.ground cable length:1.5m
Installation:
Step 1.Drilling relative holes in the ground, put the Expansion
bolts into the hole(in order to avoid the installation hole too
deep, should put into the Expanding bolts and slightly tighten nuts
until not fall off, and then take off nuts).
Step 2. Insert the bolt into the according hole on the base plate
of the product and fix it by the nuts,and then connect grounding
device such as pole and earthing piles With a grounding cable
Application: Using hand to touch the top of the metal ball 0.1s, the static of
human body Can be eliminated.
Maintenance
1.Keep the equipment clean, regular cleaning touch the dirt and oil
on the ball, prevent the influence of human body electrostatic
release.
2.Regular inspection and maintenance of the equipment, check
whether fittings such as ground wire grounding bolt looseness or
not, lest cause bad earth
3.Steel pipe can't enter the sundry, especially metal, because
there is the original circuit, if into the metal, will make the
circuit doesn't work
Product design service life is more than 3 years, and 1 year warranty by our factory.
