Hydraulic Flow Meter / Flowmeter / Flowmeters / Flowmetre For Flow
Control
Introduction
The external clip type or pipe section type ultrasonic flow meter
operates on the "velocity difference method," measuring liquid flow
in pipes. It utilizes advanced multi-pulse technology, digital
signal processing, and error correction to ensure adaptability to
industrial environments, providing convenient, economical, and
accurate measurements. Ultrasonic flowmeters find widespread
applications in sewage treatment, tap water, pumping stations,
power plants, petroleum, chemical industries, metallurgy, and more.
The KUF2000 series ultrasonic flowmeter is designed for long-term
field measurements, offering three sensor types for pipeline flow
measurement: clip type, insert type, and insert type. The sensor is
equipped with a temperature sensor for flow compensation and heat
measurement. An optional SD card can be used to store data.
Pipe section type ultrasonic flowmeter: Requires pipeline
installation, has a small starting flow, high measurement accuracy,
and no pressure loss.
External clamp-type ultrasonic flowmeter: Sensor placed outside the
pipeline, no contact with the internal liquid, installation without
damaging the pipeline, suitable for long-term online measurement.
Insert type ultrasonic flowmeter: Requires opening the pipe for
installation, with the sensor in direct contact with the fluid,
ensuring stable and reliable measurement.
Parameters
Host part | Principle | Ultrasonic time gap |
| Accuracy | ±1% |
| Display | 2×20 character LCD with backlight |
Signal output | 1 way 4~ 20mA output, electric resistance 0~ 1K,accuracy0. 1% |
| 1 way OCT pulse output( Pulse width 6 ~ 1 0 0 0 ms,default is 2 0 0 ms) |
| 1 way Relay output |
Signal input | 3 way 4~ 20mA input, accuracy 0. 1%,acquisition signal such as temperature, press and liquid level |
| Connect the temperature transducer Pt100, can finish the
heat/energy measurement |
| Data interface | Insulate RS485 serial interface, upgrade the flow meter software by
computer, support the MODBUS, METER-BUS etc. |
| Cable | Twisted-pair cable, generally, the length under 50 meters; Select the RS485 communication. The transmission distance can over
1000m. |
Pipe Condition | Pipe material | Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC,
Aluminum, Glass steel product, liner is allowed. |
| Pipe Diameter | DN15~6000mm |
| Straight length pipe | Transducer installation should be satisfied: upstream10D,
downstream 5D, 30D from the pump. |
Medium | Type of Liquid | Water, sea water, waste water, oil, chemicals (alcohol, acids,
etc.), plant effluent and other liquids |
| Temperature | -30~160°C |
| Turbidity | 10000pm not so much bubbles |
| Flow speed | 0~±10m/s |
| Environment | Temperature | Host: -20~60°C; Sensor: -30~160°C |
| Humidity | Host: 85%RH; Flow sensor: IP68, less than 2m under water |
| Power supply | DC8~36V or AC85~265V or Battery |
| Consumption | 1.5W |
Optional Temp. sensor
Sensor Selection
Optional Host
Ordering Infomation
