EN 1103 ISO 6941 Textile Vertical Flame-retardant Performance
Testing Equipment
Application:
It is applicable to the determination of flame-retardant properties
such as woven fabrics, knitted fabrics, apparel fabrics, decorative
fabrics, tent fabrics, coated products, laminated products, etc.
Meet the standards: GB/T5455 "vertical test of textile burning
performance", ISO 6940 "textile fabrics. Combustion properties.
Determination of vertical flammability of the sample", ISO 6941
"textile fabric. Combustion properties. Vertically oriented test
product flame spread Measurements, EN 1101, Textiles and Textiles,
Burning Characteristics of Curtains and Curtains, Test Procedures
for Vertically Arrangement Flammability (Small Flames), EN 1102,
Textiles and Textile Products, Combustion Properties, Curtains,
Flames Vertical Burning Test Procedures, EN 1103, Textiles, Apparel
Fabrics, Procedures for Determining Combustion Performance.
Main parameters:
Test power: 220V±10%/50HZ, 100w;
Combustion gas source: industrial propane or butane gas (liquified
liquefied petroleum gas, natural gas, gas, etc., user-owned) purity
95%
Specimen holder: composed of stainless steel, thickness 2.0mm,
length 422mm, width 89mm
Specimen size:(L300*W80)mm with medical absorbent cotton, 5 warp
and latitude, laboratory burner-based lamp
Burning torch: diameter ¢ 11MM, tube head and vertical line into a
25 ° angle;
Flame height: 40±2mm;
Gas pressure: 17.2kPa 1.7kPa;
Combustion meter: 99.99H/min/s arbitrary setting, accurate to
0.01h/m/s;
Flammability meter: 99.99H/min/s arbitrarily set, accurate to
0.01h/m/s;
Smear gauge: 99.99H/min/s arbitrary setting, accurate to 0.01h/m/s;
The angle between the igniter axis and the sample surface is
adjustable from 0° to 90°;
Hammer: (54.5, 113.4, 226.8, 340.2, 453.6) g, one each;
Ignition system: high voltage electronic ignition;
Equipment structure: The machine has an integrated structure, and
the control panel is located on the right side of the instrument;
Combustion box size: L329*W329*H767(mm), six 12.5mm air inlets
evenly arranged at the bottom
Chassis Material: The combustion chamber body is made of high
quality (t = 1.2mm) 304 steel plate.
