Plastic Pellet Dryer CSG Plus 3000 Energy Saving Hopper Dryer
CSG 3000 Dehumidifying Dryer
Product Description
This series expands CSG standard series maintaining its
characteristics while offering increased production capacity.
Its advanced thermodynamics based on Zeolite trible tower design
with three desiccant cartridges and three pumps technology: two to
process air production and one for saturated tower regeneration.
Feature
1. Microprocessor is used for accurate temperature control.
2. Hot air down-blowing design ensures even distribution of hot air
to maintain a steady temperature in the
hopper and increase drying efficiency.
3. Automatic start/stop timer one week to improve energy saving.
4. Option accessories: euro-hopper suction box, euro-hopper mobile
floor stand, material door magnet,
magnetic base(aluminum or stainless steel), blower inlet filter,
hot air recycling, exhaust air filter.
5. Europeanization design, double-wall with imported thermal
insulation material filled in interlayer,
shorten the heating time and reduce heat loss, therefore saving
energy & high efficient.
Main Advantages
1. Automatic dew point control system: not switch to new desiccant
bed before the dew point gets -20℃.
2. Three beds dryer can ease the burden of regeneration fan,
improve the drying effect and reduce the energy consumption.
3. Self-adaptive PID temperature control from 60℃ to 300℃.s
4. No need of manual control, full auto-adaptive operation.
5. No use of cooling water.
6. No moving or roating internal parts.
7. Diagnostic functions, Dewpoint, heater, and temperature alarm.
8. Visual and audible alarms available.
9. On-board heating unit on hopper saving energy.
10. Sturdy, well proven for extended operational life.
Two Beds to Three Beds
With the implement and application of the latest Germany
technology, we upgrated traditional two beds dryer to three beds
dryer. Due to the structure optimization, the effect of drying and
energy saving is significantly increased.
Along with the development fo practices, traditional dryer
gradually exposes its defects in mass production structure
constrain of two bed.
Comparison of two bes and three beds dryer
| TWO BEDS DRYER | THREE BEDS DRYER |
| restriction of switching mode | less fluctuaion of dew point |
| wild fluctuation of dew point | more evenly drying effect |
| high energy consumption | more energy saving |
| unstable drying effect | longer service life |
| broader application range |
Taking fully account of drying effect and equipment cost, we should
use three beds dryer in the mass production. Three beds dryer can
ease the burden of regeneration fan, improve the drying effect and
reduce the energy consumption.
*Three Beds Dryer Version
Dew Point Control
Instead of superficial time control, now we precisely control our
pneumatic value on the basis of dew point. It’s the energy
consumption solution with highest cost performance.We have the
best-matched regeneration control and control the frequence of
regeneration according to the moisture content. The most efficient
energy consumption, no earlier or longer, just the right time with
no waste.
