General introduction
Artistically veined powder coatings of mixed type,polyester type
and other types are
available,They are suitable for indoor and outdoor use
respectively.Artistic powder coating has special
decorative effects of luxury appearance,which can help to cover up
the defects of the substrate.It is widely
used in the coating for various top grade metallic appliances.
What is Powder Coating?
Powder coating is a new type of 100% solid powder coating which
does not contain solvents. With no solvent, no pollution, energy
and resources saving, recycling, environmental protection, higher
performance, low health risk to workforce, economical advantages
etc.
Most powder coating is used by electrostatic spraying on metal
surface, and then cure in oven, eventually form a solid layer.
Classification of Powder Coatings
1, Functional powder coatings: powder coating of Antibacterial,
Super weather resistance, Oil resistance, Dissipate heat, High
temperature resistance etc.
2, Colorful powder coatings: Ral, Pantone, Customized colors
3, Special effects powder coatings: Candy, Glow in the dark, Clear
top coat, Metallic, Chrome silver mirror effect, Thin coat, MDF
powder coating etc.
4, Texture powder coatings: powder coating of Hammer, wood grain,
water grain, crocodile skin, sand grain, wrinkle etc.
♦ Epoxy powder coating: offer the best corrosion protection.
♦ Polyester powder coating: offer the highest exterior stability
and performance.
♦ Our products applied to indoor and outdoor.
♦ Our products with SGS,Tuv, Rohs, ISO Certificate.
Applications of Product
| ♦ Electrical Household Appliances | ♦ Aerospace Area |
| ♦ Automotive Electronics | ♦ Fitness Equipment |
| ♦ Track Traffic | ♦ Medical Devices |
| ♦ Petroleum Pipes, Valve | ♦ Tools & Hardware |
| ♦ LED Lights, Outdoor Lamps | ♦ Radiator & Heat Sink |
| ♦ Glass Decoration | ♦ External Facilities |
Product detail
| Test Item | Test Method | Test Result |
| Film Thickness | ISO2360 | 60-80um |
| Pencil Hardness | ASTMD 3363 | HB-H |
| Bending | ISO1519 | ≤10mm |
| Grid Test 1mm | ISO2409 | 0 Class |
| Impulse Test | ASTMD2794 | Pass |
| Cupping Test | ISO1520 | ≥8mm |
| Heat Resistance 1000 hours | ISO6270-1 | Popping<1mm |
| Salt Spray 1000 hours | ISO9227 | Corrosion Spreading<1mm |
