Customized Food Sterilizer Machine High Temperature With Double
Safety Interlocking
Ⅰ Product description
Food sterilizer machine researched and development by the low-acid
food heating processing expert, it’sdesigning and manufacturing
according to national standard and some regulation of FDA.
Reasonable inner pipelined esigning ensure evenly heat distribution
and fast heat penetration. Allocate F-value to control sterilizing
effect based on customer’s demand, keep food’s flavor, colour and
nutrition, and enhance attached value of food product, increase
economic benefit for client.
The PLC control is used to precisely control the temperature,
pressure and sterilization time in the sterilization process. The
sterilization formula can be designed according to the type and
technical requirements of the customer's products.
F-value sterilization is a technology which control the whole
process by pre-set sterilizing effect, the whole working process is
more controllable, precisely and audio-visual, this technology can
ensure the sterilization effect keep uniform for each batch.
F-value test technology has listed in some regulation of FDA and
has been widely adopted in the U.S... It has a importance
especially for tin can food.
Ⅱ Main Model
| Type | Total capacity(m³) | Treat capacity(m³) | Trolley number | Basket number |
| ATP700*1200 | 0.46 | 0.25 | 1 | 3 |
| ATP900*1800 | 1.1 | 0.57 | 2 | 8 |
| ATP1000*2400 | 1.8 | 1.0 | 3 | 12 |
| ATP1200*3600 | 4.0 | 2.0 | 4 | 20 |
Note: If the above model is not available, please tell us the treat
capacity you need. We can customize it for you.
Ⅲ Technical parameters
| Name | Technical Data |
| Test pressure | 0.44Mpa |
| Design pressure | 0.35 Mpa |
| Maximum operating pressure | 0.30 Mpa |
| The maximum operating temperature | 143℃ |
| Design temperature | 147℃ |
| Heating method | Electric heating or using steam boiler as heat source |
| Voltage | 380 V 3 phase 50Hz(can be customized) |
| Material | SUS304 stainless steel |
| Water quality requirement | Sterilizing water, cooling water for tap water, not more than 25
mg/L chloride ion content |
Ⅳ Our advantages
1. Uniform water exchange method, uniform temperature, no dead ends. Circulating water circulated constantly and uniformly in
sterilization tank. Ensure uniform heat distribution at any point
in the process of heating, insulation and cooling. So the packed
foods of different positions of the tray gained the ideal uniform
heating effect, effectively eliminate the phenomenon of blind Angle
in the process of sterilization. Make the product a longer shelf
life. Reduce F value variation and the phenomenon of excessive
cooking.
2. Using double tank hot water circulation method to sterilization,
hot water heated to the temperature of the sterilization
requirements before sterilization to shorten the sterilization time
and improve work efficiency.
3. Using international advanced technology and hot water circulation
immersion method to sterilization. Full automatic intelligent
control system. Precise temperature control(±0.5°c).
4. Working medium can be recycled, save the energy, time and the
consumption of manpower and material resources, reduce the
production cost.
