SUS304 Stainless Steel Food Sterilizer Machine High Configuration
High Temperature
Ⅰ Product description
Water spray sterilization retort was researched and development by
the low-acid food heating processing expert, it’sdesigning and
manufacturing according to national standard and some regulation of
FDA. Reasonable inner pipelined esigning ensure evenly heat
distribution and fast heat penetration. Allocate F-value to control
sterilizing effect based on customer’s demand, keep food’s flavor,
colour and nutrition, and enhance attached value of food product,
increase economic benefit for client.
• According to the material divided into carbon steel type and stainless steel type.
• According to the sterilization method divided into spray type, water bath type, steam type and rotary type.
• According to the heating method divided into steam heat type andelectric heat type.
• According to the structure divided into single-deck type, double-deck type, two-pot parallel type and three-pot parallel type.
Ⅱ Main Model
| Type | Total capacity(m³) | Treat capacity(m³) | Trolley number | Basket number |
| ATP700*1200 | 0.46 | 0.25 | 1 | 3 |
| ATP900*1800 | 1.1 | 0.57 | 2 | 8 |
| ATP1000*2400 | 1.8 | 1.0 | 3 | 12 |
| ATP1200*3600 | 4.0 | 2.0 | 4 | 20 |
Note: If the above model is not available, please tell us the treat
capacity you need. We can customize it for you.
Ⅲ Technical parameters
| Name | Technical Data |
| Test pressure | 0.44Mpa |
| Design pressure | 0.35 Mpa |
| Maximum operating pressure | 0.30 Mpa |
| The maximum operating temperature | 143℃ |
| Design temperature | 147℃ |
| Heating method | Electric heating or using steam boiler as heat source |
| Voltage | 380 V 3 phase 50Hz(can be customized) |
| Material | SUS304 stainless steel |
| Water quality requirement | Sterilizing water, cooling water for tap water, not more than 25
mg/L chloride ion content |
Ⅳ Our advantages
1. A small quantity of the process watercan circulated quickly to
amount to the expected sterilizing temperature.
2. It produces low noise, creating quiet and comfortble working
environment.
3. It takes perfect control of the temperature. During the whole
process, the pressure is constantly adjusted to the the change of
the pressure inside the packages, which can make the deformability
of the packages go down to the lowest. It is especially suitable
for the packages with air.
4. Retort material:Stainless steel sus304, Use flanges and heads of
the superior quality in China, advanced and stable SIEMENS control
system ensures that customers can timely find the supply chain in
the world to reduce downtime.
5. Retort Safety:Door safety protection:If the door is not closed
completely, sterilization will not start. Pressure safety
protection: Do not open the door until the pressure released.Safety
valve:Safety valve used when pressure is over pressure to ensure
the safety of operators and products.
6. Retort Insulation - coating:The overall horizontal sterilizer is
coated with 20mm silicon foam + 20mm general foam + stainless steel
sheet and riveted to prevent heat losses.
