Automatic clamping paint colorant shaker , vibrating machine for
coating , painting , varnish
Features
Automatic clamp and adjustable pressure to bear on the can
according to the can size, will not squish or stave the can.
It’s suitable to 0.5L-20L all kinds of can/barrel, max load weight
is 30kg.
Easy operation and few maintainence: with PLC microcomputer
control, can set the shaking time freely by the “T1”“T2” “T3” time
key, the longest time can be set is 9 mins.
High speed and thoroughly mixing by up and down continuous
multi-shake movement.
Technical Data
Time of Mixing: 1-9min
Size of Mixing can: 0.5L~20L
Maximum weight of mixing can: 35KG
Suitable can height: 80~410mm
Suitable can bottom size:350(L)*350(W) mm
Power Supply: 220V/110V
Rated Power: 750W
Net Weight: 223KG
Gross Weight: 258KG
Machine Size: 740(l)*800(w)*1070(h)mm
Packing Size: 770(l)*840(w)*1210(h)mm
Control panel introduction
T1 button (1 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 1 minute mixing.
T2 button(3 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 3 minutes mixing.
T3 button(5 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 5 minutes mixing.
T1+T2: Press T1+T2 at the same time , clamping plate automatically clamps
the canister, and finish appointed 4 minutes time mixing.
T1+T3: Press T1+T3 at the same time , clamping plate automatically clamps
the canister, and finish appointed 6 minutes time mixing.
T2+T3: Press T2+T3 at the same time , clamping plate automatically clamps
the canister, and finish appointed 8 minutes time mixing.
T1+T2+T3: Press T1+T2+T3 at the same time , clamping plate automatically
clamps the canister, and finish appointed 9 minutes time mixing.
Button (Stop, lift button) :
A). When machine is in the state of "Mixing" or "Clamping", LCD
shows "Mixing" or "Clamping". At this time, press this button,
machine will stop mixing or clamping and lift the clamping plate.
B). When machine is in the "ready" state, LCD shows "Ready". At
this time, press this button, the clamping plate will lift up, and
stop when you release the button.
Our Service
- Warranty: We offer a period of one year warranty for each equipment. Within
guarantee period, we can help you judge the fault according to the
failure phenomenon by E-mail. and send replacement part to you. If
the fault has been caused by mis-use or abnormal conditions of
operation, repairs will be billed at a normal cost in this case. An
estimate will be submitted before repair work is started in case
requested.
- Training:You can send personnel to our factory for free training on the
machine.
- Inspection: You can send inspectors to our factory for inspection or we
self-inspect following the technical requirements mentioned in
contracts.
- Testing of equipments: all our machines are tested before shipment. All machines are at
its optimal state when shipped.
Our Main Product includes
Automatic paint dispenser, Manual paint dispenser,Automatic paint
mixer,Manual paint mixer,Automatic paint shaker.All our equipment
machinery and products are developed and manufactured under
stringent safety rules and meet CE.They are sold globally to retail
paint stores, paint manufacturers, point of sale retailers and
industrial users.
