05D560K Metal Oxide Varistor / 3 Mov Electronic Component 56V Varistor Voltage

Zinc oxide varistor

Color: Blue

Verification: CE

Product description

Varistor is one of the most used voltage limiting devices. Zinc oxide varistor is mainly an overvoltage protection device which is made of zinc oxide as raw material, mixed with various trace metals and sintered and assembled. , its outer bread seal epoxy resin can add pigment

Product specifications

Use attention

1. Varistors may cause other problems due to the effect of the impedance of their capacitors on high frequency applications.

2. Direct exposure to the sun or ambient temperature near the heater may exceed the operating temperature that the varistor can withstand

3. When soldering, please be careful not to melt the solder joints and resin of the varistor.

4. If the varistor is applied to a high-voltage line similar to thunder, it is recommended to install the varistor on the 220v power line.

working principle

The varistor utilizes the nonlinear characteristic of the varistor. When an overvoltage occurs between the two poles of the varistor, the varistor can clamp the voltage to a relatively fixed voltage value, thereby protecting the latter circuit.

Company profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support. All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

FQA

Q: What advantages do you have?

A: We have been manufacturing and exporting SPD for more than 10 years !

We have CE and TUV certification

Q: Can I get some samples?

A: We support small quantity samples order ! please contact with our staff and leave your detail contact information , we will answer you within 24 hours

Q: How long does it take to deliver?

A: Fast delivery : 3~7days after payment

Q: Could you do OEM for us?

A: We have good experience on OEM service

Q: How long is your products warranty ?

A: 3 years warranty

Q: How to pay?

A: We accept T/T, Paypal, Western union, L/C, Trade Assurance

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.