High Power 3600w Ultrasonic Vibration Oscillator with PZT8 Ceramics
Description:
The ultrasonic vibrator is composed of an ultrasonic transducer and
an ultrasonic horn. Ultrasonic transducer is a device that can
convert high-frequency electric energy into mechanical energy.
Ultrasonic horn is a passive device that does not generate
vibration. It only changes the amplitude of the vibration input
from the ultrasonic transducer and then transmits it. Impedance
transformation.
Specifications:
| Model | QR-7015-4BZ-BZ |
| Frequency | 15 khz |
| Output power | 3600 watt |
| Joint bolt | M16*1 |
| Ceramic disc Diameter | 70mm |
| Qty of ceramic discs | 4pcs |
| Capacitance | 12.5-14nf |
| Application | Plastic welding machine |
Maintenance:
Not used for more than one week, please cover with dust jacket
(plastic bag);
Except that the lifting screw has received lubricating oil before
leaving the factory, no other oil agent is required in other parts;
Regularly check the internal vibrator output line for wear;
The appearance is dusty. Please wipe it with a clean cloth. Clean
the dust inside the machine with dry compressed air every six
months. It is forbidden to use various fluxes when cleaning the
side plates and surfaces of the welder. Use a neutral detergent and
gently wipe. test;
When the filter cup reaches 13 water level, please remove the
water;
Every time the welder is used for one month, the sliding part
should be cleaned and reapplied with high-quality grease;
Always pay attention to the safety of the machine position
High Power 3600w Ultrasonic Vibration Oscillator with PZT8 Ceramics
