Enhancing Production Rate and Good Quality by 35Khz Ultrasonic
Sealing Technology
Description:
The ultrasonic system is mainly composed of ultrasonic generator
and ultrasonic transducer. The ultrasonic transducer is a sandwich
transducer made of lead zirconate titanate piezoelectric ceramic
material. The piezoelectric ceramic material has an electric field
effect. Under the phenomenon of dimensional change, the transducer
generates mechanical vibration under the action of an alternating
electric field.
Ultrasonic system normal condition: The normal vibration group
(transducer + horn) has a current of 0.3A~0.8A and an amplitude of
1%~10%.
Specifications:
| Item No | QR-S35ND |
| Power | 1000W |
| Generator | Digital generator |
| Frequency | 35KHZ |
| Voltage | 220V or 110V |
| Width of welding wheel | 11.5mm |
| Matched Transducer | 3535-4D PZT4 |
| Generator size | 250*200*430mm |
Device installation:
1. Disassemble the package, check the surface and parts of the
equipment for signs of damage, check whether the screws are loose,
whether the electrical connectors are locked, and whether the
accessories are complete.
2. Ultrasonic lace machine equipment should be placed on a flat
hard ground, requiring the lace machine to be at least 0.5 meters
away from the heat source, and to ensure that the lace machine has
at least 1 meter before and after, and at least 0.5 meters of space
for operation.
3. Check the voltage requirements on the back of the vibration box
and ensure that the system is well grounded.
4. Connect the device to the power supply and air supply. Be sure
to turn off the power switch first. Pay attention to the voltage
requirements of this unit: AC220V, 50-60Hz
5. The air line is connected to a clean, non-lubricated compressed
air source with a rated working pressure of 0.6 MPa.
Enhancing Production Rate and Good Quality by 35Khz Ultrasonic
Sealing Technology
