Glass Bottle Mango Juice Hot Filling Machine / Aseptic Milk Bottle
Filler
Video show
https://www.youtube.com/watch?v=GBgpzQLpioU
1. Hot filling temperature
2. Production capacity:4000Bottles per hour
3. Suitable for PET or Glass bottle with different shape and
200-2000ml volume
Technique parameter
| Model | CGF16-12-6 | CGF18-18-6 | CGF24-24-8 |
| Productivity | 3000BPH | 6000BPH | 10000BPH |
| Rinsing Head | 16 | 18 | 24 |
| Filling Head | 12 | 18 | 24 |
| Capping Head | 6 | 6 | 8 |
| Bottle Volume | 350ml~2000ml±10ml |
| Bottle Diameter | φ50-92mm |
| Bottle Height | 150-310 mm |
| Filling Tolerance | ±2% |
| Cap Size | 28mm and 30mm PE Standard Caps |
| Air Pressure | 0.6MPa |
| Air Consumption | 500 L/min |
| Filling Water Consumption | 1.5 m3/h | 3 m3/h | 6 m3/h |
| Rinsing Water Consumption | 0.5 m3/h | 1 m3/h | 2 m3/h |
| Motor Power | 5.88kW | 6.68kW | 7.68kW |
| Voltage | 380V |
| Dimension | (L*W*H) 2100*1500*2200mm | (L×W×H) 2450*1800*2200mm | (L×W×H) 2750*2180*2200mm |
| Weight | 2500kg | 3000kg | 5300kg |
| Filling Principle | Gravity Filling |
Features:
The juice filling machine is used to fill PET heat-resistant bottle
for fruit tea, juice and other high-temperature juice.
The core parts of machine employs PLC+, frequency convertor+ and
human-machine interface control technology
The machine can be connected with UHT, CIP control center and
bottle-invert sterilizer
The machine structure is reasonable and firm, the running state is
stable
The suspension bottle neck catcher allows the machine change the
bottle type easily
Safe protective devices ensure safety of operator and machine
Magnetic torsion type screw capper ensures the tightness of the cap
and avoids bottle damage
The module of screw capper ensures the tightness of the cap and
avoids bottle damage
Slight negative-pressure gravity circumfluence filling system
increases juice filling accuracy and reduces contamination
Unique control mechanism keeps circumfluence volume below 5%
Detailed pictures
1.Washing part
1). The rotary disk is fully made of SUS304 stainless steel.
2). Using company original tilting bottle clip, bottle clamp stuck
bottle neck, avoid the traditional bottle on rubber clip to block
the bottle thread parts may be caused by the pollution. Bottle clip
is made of SUS304 stainless steel, health and durable.
3). Using imported special efficient spray nozzle, the washing
water will be sprayed in a particular angle, can wash any part of
the inner wall, rinse with water thoroughly and save flush bottle.
4). Bottle clamp and lifting mechanism of sliding sleeve adopts
Germany Igus corrosion resistant bearing without maintenance.
5). Washing part moves by a frame in the transmission system
through the gear transmission.
2.Filling part
1). The washing bottle, filling, sealing are connecting with the
thumbwheel card bottleneck transportation methods.
2). The rotating disk is all made of SUS304 stainless.
3). Filling method is gravity filling.
4). Filling valve manufactured by SUS304.
5). The filling valve structure design is reasonable, the filling
quantity is accurate.
3.Capping part
1). The capping machine is the highest precision in 3-in-1 unit
machine, on the reliability of equipment operation, has enormous
influence on the defective rate of the product.
2). Introduced the world's most advanced Italian AROL capping
machine technology, combining with the filling machine production
experience improvement, and ask college of Shanghai Jiaotong
university mechanical engineering institute of electrical and
mechanical design and automation technology of experts and
professors to help design.
