30-100M Coverage Range Remote Control Jammer/Two Channel
433MHz315MHz Remote Control Signal Jammer
Description:
This is a two-way remote control signal shielding device with black
aluminum casing. The heat dissipation function is very good. There
are two frequency segments, one is 433MHz and the other is 315MHz.
It is a mini signal shielding device, which can be hand-held or
placed in the car. Used in the middle, when your product is turned
on, you can shield the remote control signal around the car or
around 30-100M around the shield within a certain range. Such as
remote control toys, remote control aircraft. However, please note
that if your car key is controlled by a remote control signal,
please turn off the phone and then lock your car. Otherwise, your
door will be cut off because the remote control signal is not
actually locked.
Parameter:
| Operating voltage | DC9V (built-in rechargeable lithium battery (800mAh)) |
| Operating current | 240mA (dual frequency) |
| Working frequency | 315/433 MHz |
| Coverage radius | 30-100M |
| Dimensions | 210*60*25MM (including antenna) |
| Power adapter | DC9V/1A |
| Colour | Black |
| Material | Aluminum Alloy |
Instructions
1. Open the package and screw the instrument antenna to the antenna
socket on the back of the instrument. Tighten to prevent abnormal
operation.
2. You need to charge 3-4 hours before you can use it. The factory
power of the product is only about 50%. (Low battery will directly
affect the use of results)
3. Press the side power switch, the blue indicator light, the
monitor emits 315MHz,433MHz wireless signal. That is, press the
side power switch again, the blue indicator will turn off and the
monitor will stop working.
4. Frequency default ANT1 is 315MHz, ANT2 is 433MHz. (from left to
right)
Precautions:
1. Never use a non-dedicated power adapter to plug into the power
input
2. There is danger of electricity in the host, please do not open
the back cover to avoid electric shock and affect the warranty.
3. Turn off the power and unplug the power plug when you are not
using it for a long time or when you are away for a long time.
4. Please use in a suitable shielded environment, so as not to
affect the use of effects.
5. Avoid exposure, rain, water droplets, long-term exposure to high
temperature and humidity.
6. The effective range of the instrument is a circular area
centered on the main unit. Therefore, when using it, be careful to
select the correct position of the instrument to avoid blind
corners.
7. This product is a sensitive instrument for remote control
products. It will shield the remote control signals such as
electric cars, automobiles, remote control doors, access control,
etc. Please use it rationally.
