Professional Gabion Box 100 x 120mm Mesh Size For Steep Slopes Lining

Hot-dip Galvanized Low Carbon Steel Wire Gabion Boxes for Lining of Steep Slopes

Gabion Box brief:

The height of the gabion mat is much less than its length and width, after putting the stone in the gabion mat,the gabions mats are connected together.The difference from traditional gabions is its shape, it is flat and large,the wire diameter is usually thinner thantraditional gabions, and most is hot-dip galvanized or galfan. And usually there are double diaphragms of gabionmat and single diaphragm of gabion mat

Material:

1. hot-dip galvanized low carbon steel wire,

2. Zinc-5%Al or10%Al-mixed rare earth alloy coating, also named Galfan. lifetime 3times min than hot-dip galvanized gabion.

3. PVC coated , PVC coated on hot-dip galvanized steel wire and Galfan, many kinds of color

4. Tensile strength: 350-500Mpa,Elongation ≥12%,according to EN10223-3

5. zinc coating: mesh wire≥230g/M2,selvedge wire≥245g/M2,lacing wire ≥230g/M2

Advantage:

Flexibility: Flexibility is an important benefit of any gabion structure. The double-twist hexagonal mesh construction permits it to tolerate differential settlement without fracture. This property is especially important when a structure is on unstable soil conditions or in areas where scour from wave action or currents can undermine the toe of the structure and cause structural settlement.

Durability: Gabions support plant growth which provides a live coating for the wire mesh and stones, adding to their durability. Generally, the wire mesh is needed for the first few years of the structure’s life; later the void between the stones is filled with soil, silt, and plant roots which act as a bonding agent for the stones.

Strength: Steel wire hexagonal mesh has strength and flexibility to withstand forces generated by water and earth masses, and the pervious nature of the gabion allows it to absorb and dissipate much of that energy. This is evident on coast protection installations where gabion structures remain effective long after a massive rigid structure fails. Additionally, the double twisted hexagonal mesh won’t unravel if cut.

Permeability: Gabion walls are previous to water and stabilize slopes by the combined action of draining and retaining, precluding the development of hydrostatic pressure behind the gabion wall. Drainage is accomplished by gravity, as well as evaporation as the porous structure permits air circulation through it. As plant growth develops within the structure, the process of transpiration assists in removing moisture from the backfill – a much more efficient system than weep holes in standard masonry walls.

Low cost: Gabion systems are more economical than rigid or semi-rigid structures for the following reasons:

• It requires little maintenance

• Its installations does not require skilled labor and stone fill is available on site or from nearby quarries,

• It requires little or no foundation preparation, as the surface needs to be only reasonably level and smooth.

• Gabions are porous, requiring no costly drainage provision

Ecology: Gabions is an environmentally sensitive solution to slope stabilization. It has already been mentioned that stone fill is done with natural stones making the gabions, naturally porous allowing interaction between the land and the water table and also persuades deposition of soil in the smaller voids between the stone fill during drainage that again promote vegetation growth.

Aesthetics: Gabions supporting vegetation has already been discussed; in some case the vegetation growth is so intense, making the gabion structure invisible, and pleasant to look at. Again if additional effort is given during construction, the gabion can create really pleasing structure with or without vegetation. Unlike other types of materials such a modular block walls the gabion stones do not discolor due to drainage.

SUNRICH company start from 2008, from now on we have about 10 years history, our principle is just providing 4G products for customers. 

Good material: We just use new materials, never use second hand material. All the important machine parts material are cast steel, cast iron,nodular cast iron. Just use good material then machine will has long life.

Good quality: All machine parts produce by ourselves, we can control all the machine parts material and quality.Our workers have much experience for the machine parts process, we can control the tolerance.

Good technology: We always develop our machine technique according foreign advanced technology and domestic good technology, we try to produce perfect machines for our customer.

Good service: We will provide you good suggestion for what kind of machine is suitable for your production.

Also after machine arrive in your factory, we will send our technician help you installation and debug machine.

If customers need our technician can help you train your workers until they understand.

Our company professionally manufacturers and exports gabion mesh machine, gabion production lines,

and all kinds of gabion products such as gabion boxes, gabion mattresses ,sack gabion and rockfall

netting. our products have been sold in more than 40 countries or regions, such as Malaysia, Thailand,Vietnam,Spain, South Africa, North Africa, Iran, India, Morocco and so on.

We are welcome  foreign and domestic customers to visit our factory. Choose us you will get good suggestions, good technician, good after-sale service.