CWC-150 Hydraulic Busbar Processing Machine,Hydraulic Busbar
Cutting Tools
Technical Data
Hydraulic Busbar Processing Machine,Hydraulic Busbar Cutting Tools
| Product No. | Model Type | Output (KN) | Operating stroke(mm) | Cutting Rangemm(mm) | Weight(kg) |
| 80109 | CWC-150 | 230 | 50 | ≤150*12 | 20 |
| 80110 | CWC-200 | 270 | 70 | ≤200*12 | 27 |
Hydraulic Bus bar Cutting Tools for Metal Sheet Cutting Up to 12mm
is a remote control tools, works with an external hydraulic pump
(capable of providing 700Bar working pressure). CWC-200 is intended
to be used to cut Cu/Al busbar, it's cutting capacity is 200mm*12mm
(Width*Thickness). With the help of hydraulic power and sharp
cutting blade, quick and clean cutting can be achieved. Cutting
surface is smooth, without burr.
This Busbar punching machine is suitable for pingching holes on
Land H shape iron plate, copper and aluminum busbars, its punch
dies made of high carbon tungesten steel and not easy to towear
off. In all this busbar cutter is easy to carry and simple operate.
Characteristic:
CWC-150 Hydraulic Busbar Processing Machine,Hydraulic Busbar
Cutting Tools
The unilateral type structure, cutting in larger power, but it does
not waste materials.
The blade adopts alloy tool steel forging fine grinding, the
incision is neat, no burr and no deformation.
During cutting, the copper and aluminum row should not be fixed,
any position is OK.
The pressing device is equipped with the blade side in order to
prevent the tilt of copper and aluminum row.
It can use with pump CFP-800-1,CP-700,EHP-70ZS,EHP--63A.
