3/1 Twill 280T Super Stretch Fabric With TPU Membrane Waterproof
And Drape For Outdoor Sports Wear
1 . Descriptions:
The fabric is cationic stretch fabric . It is 30+20*30+20. It is
woven in 3/1 twill and it is mechanical stretch . After dying ,we
finish this fabric with TPU membrane . As a result , the fabric is
waterproof and windproof .
2 . Specifications:
The Thickness Index : Ultra-thin Thin General Thick
The Soft Index : Hard Moderation Soft Super Soft
Elastic Index : Inelasticity Micro-elasticity Elasticity Super Elasticity
Season : Spring Fall Summer Winter
3 .Characteristics:
This kind of fabric can be used for leisure garment, such as
outdoor jacket . And it has a wide range of uses .It is favored by
outdoor clothing , especially in the autumn and winter season.
The weft direction of the fabric is elastic and has comfortable
properties. After finishing, the fabric is cold-proof, waterproof,
breathable, anti-tear and friction-resistant and achieves high
color fastness. It aspects quite high performance both in
waterproof and breathable, so it is the choice to make high quality
garment. A very thin membrane is affixed to the back of the fabric
and placed on the fabric in an interlayer manner.
4 .About Cationic Fabric:
Fabrics woven from cationic modified fibers have the following
properties when dyed with cationic dyes:
1. Bright color, good deep color;
2. High absorption rate (high dyeing rate);
3. Good fastness to sunlight and fading color of smoke;
4. Good dye compatibility when color matching dyeing;
5. Good stability in high-temperature dyeing bath;
6. Less contamination to other fibers, including ordinary polyester
fibers;
7. The diffusion rate to the inside of the fiber is fast and there
is no ring dyeing;
8. Dye stability is high when pH value changes in dyeing bath.
Fabrics can be compared with natural fabrics in terms of wearing
comfort and bright color, and lower in price than natural silk,
which can generate high added value.
How can we obtain the windproof effect of the fabric?
|
| Methods | Effects |
| Rely on the density of the fabric itself to achieve windproof
effect | - The most typical examples are knitted fabrics and woven fabrics .
The woven fabrics are not as porous as knitted fabrics due to their
high density and interlacing points. So when you wear it in winter,
it's warmer, which means the wind doesn't leak out. In woven
fabrics, the higher the density, the better the wind resistance, .
But relying on the fabric density to prevent the wind is not better
than through the coating or film processing of the fabric .
|
| Be coated or lamination | Basically all fabrics can achieve wind proof effect through this
kind of means . It can accomplish a bit not ventilated, namely
breathability test is zero . |
5 .More pictures:
