Yuchai Engine Power Generator 200KW / 250KVA Diesel Generator Set
Product Description
Diesel Generator Set is a set of complete equipment for electrical
power supply. Yuchai engines, high quality alternators and advanced
full automatically control system are produced through strict test,
which together provides reliable power no matter as standby, prime
or continuous use.
Genset Specifications:
| Genset model | SYF275 |
| Genset rated power | 200KW/250KVA |
| Rated voltage | 400/230V (adjustable) |
| Rated current | 360 Amps |
| Frequency | 50 Hz |
| Power factor | 0.8 Lagging |
| Connecting type | 3 phase 4 wire |
| Cooling system | Closed cycle water-cooled with fan, radiator |
| Overall dimension (L×W×H) mm | 2600×1000×1500 |
| Gross weight (kg) | 2200 |
| Diesel Engine |
| Brand | YUCHAI |
| Model | YC6MK350-D30 |
| Engine type | 6 cylinders in Line, 4 stroke, electronic fuel injection |
| Aspiration | Turbocharged |
| Rotating speed | 1500 RPM |
| Engine cooling system | Water-cooled |
| Speed governing system | Electronic speed governor |
| Starting method | By 12V battery |
| Engine filter system | Dry type air filter ,fuel filter, oil filter, water filter |
| Displacement(L) | 10.34 |
| Bore×Stroke(mm) | 123×145 |
| Compression ratio | 17.5:1 |
| 100% Load fuel consumption (l/h) | ≤50.5 |
| Lube capacity(L) | 28 |
| Alternator |
| Brand | FARADAY |
| Model | FD3H1-4 |
| Excite type | Brushless self-excited AVR regulation |
| Connecting type | 3 phase 4 pole |
| Steady frequency change | 0.50% |
| No load voltage | ≥95%-105% |
| Steady voltage | ≤±1% |
| Insulation class | Class H |
| Protection grade | IP23 |
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to
certify the engine output and fuel consumption in accordance with
the site operating condition specified by purchaser on the
specification datasheet.
1.2 All relevant information drawings pertinent to the testing and
test procedure shall be transmitted to the purchaser in advance of
the test date notification.
1.3 The purchaser shall call for additional testing if test results
are unsatisfactory or marginal. Any equipment rejected shall be
repaired or replaced to the purchaser’s satisfaction and tests
shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or
workmanship shall be replaced or repaired to the purchasers
satisfaction at the manufacturers cost.
1.5 The engine and generator shall be tested individually in
accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator
shall be assembled onto the base plate with all auxiliaries,
instruments and controls for a complete test of the generator set.
Control System
Standard control panel is the basic configure for normally
operation and usage. The advantages of this panel are easy
operation, aomprehensive function and reliable protection and so
on. There are indicating gauges, lamps, transfer switches and
emergency stop button, etc. The control panel wil stop the whole
generator set and alarm as well when malfunction appears.
