Split Aluminium Frame Pipe Cutting And Beveling Machine Processing
Range 2" - 6"
Product Introduction
Products of Split Aluminium Frame Pipe Cutting And Beveling Machines series are portable processing equipment for cutting, beveling and
end prefabrication of various pipes, with which cutting and
beveling can be conducted at the same time. With an R&D history
of nearly one hundred years, the product can process pipes or
casings accurately, continuously and vertically.
Product Features
■ Split frame technology, easy to install in the pipeline;
■ Out-mounted, clamping by multipoint jaws;
■ Cold cutting, don’t influence the pipe’s material;
■ Auto feed, cut and bevel the pipe at the same time,
cost-effective;
■ Three types of drive motors: electric, pneumatic and hydraulic;
■ Can process material: carbon steel, alloy steel, stainless steel
etc.
■ Precise cutting and beveling tools with high efficiency and long
service life.
Application Industries
■ Energy Field
Oil and Gas
Pipeline Transmission,Gathering&Storage
Petrochemistry
■ Construction and Construction Equipment
Water and Gas
Water and Treatment
Heater
■ Process Engineering
Chemical Industry
Shipbuilding
Boiler Shop
Semiconductor
Specifications
| Model | SFM0206P |
| Drive Mode | Pneumatic |
| Air Requirements | 2-3m³/min |
| Application Range (O.D.) | 2"-6" |
| Wall Thickness | ≤30mm |
| Net Weight | 35kg |
| Feed Method | Star wheel system |
| Feed | 0.08mm/r |
All standard accessories included
|
Safety Instructions
■ Keep a good working environment and prevent the operator from
slipping or tumbling due to poor lighting, ground oil stain, narrow
passage or unreasonable stacking of parts and semi-products;
■ The cooling liquid is erosive, please avoid direct skin contact
as much as possible;
■ Goggles, ear defenders and protective boots must be worn when the
machine is working, and it is forbidden to work while wearing the
gloves. The dust mask also must be worn in the severe environment
with heavy dust.
