High Frequencies RF SMD Power Inductors Flat Top Air Core Chip Coil
3.85nF 1.6A Round For Surface Mounting
General
Aolittel's ultra-miniature single layer coil has two advantages.
Firstly, like all air core coils, it is free from iron losses and
the non-linearity. Secondly, single layer coils have the additional
advantage of low self-capacitance and thus high self-resonant
frequency. Air Coils is known as "Spring Coils". Aolittel
manufactures all types of air coils inductors.
Single layer air coil windings formula and the Q factor can be
referred at Equations of Single Layer Air Coil Winding Formula and
Methods.
TRAD's inductance is unaffected by the current it carries. This
contrasts with the situation with coils using ferromagnetic cores
whose inductance tends to reach a peak at moderate field strengths
before dropping towards zero as saturation approaches. (TRAD)
series features better Q-factor, greater efficiency, greater power
handling, Highest possible SRFs, and less distortion.
Aolittel RF chip inductor non-flat top air core inductor conforms
to the RoHS directive and Lead-free. Application of specific
designs also available including different inductance values and Q
specifications adjusted to frequency requirements.
Features
SMD Air-Core Inductor supporting High Frequency range with Compact
and Low Profile structure
Can be used in high frequency range because of high SRF
Can be used for circuits such as RF matching circuit, antenna
matching circuit, filter circuit and tuner circuit, which require
the characteristics of Q Narrow tolerance available for
Inductance(±2%)
Operating Temperature:-40℃～+125℃(Including Self-heating)
Solder coated leads ensure reliable soldering.
Non-Flat top and bottom for mechanical stability.
Highest possible SRFs as well as excellent Q values.
High frequency.
Good constitutive property and easy to operate.
Applications
Pager, Cordless phone.
Intercom, CATV.
Pager, Cordless phone & High Frequency Communication Products.
Specification
The Advantages of an Air Core Inductor (coils)
Its inductance is unaffected by the current it carries. This
contrasts with the situation with coils using ferromagnetic cores
whose inductance tends to reach a peak at moderate field strengths
before dropping towards zero as saturation approaches. Sometimes
non-linearity in the magnetization curve can be tolerated; for
example in switching converters. In circuits such as audio cross
over networks in Hi-Fi speaker systems you must avoid distortion;
then you need an air coil. Most radio transmitters rely on air
coils to prevent the production of harmonics.
Air coils are also free of the 'iron losses' which affect
ferromagnetic cores. As frequency is increased this advantage
becomes progressively more important. You obtain better Q-factor,
greater efficiency, greater power handling, and less distortion.
Lastly, air coils can be designed to perform at frequencies as high
as 1 Ghz. Most ferromagnetic cores tend to be rather lossy above
100 MHz.
The Flat Top Air Core AM Inductors are lead-free and RoHS
compliant. Please contact us for details with your specific needs.
