ID mounted Electric Tube Beveling Pipe End Beveling Machine And
Pipe Facing Tool
Product Introduction
The portable pipe beveling machines for mechanical pipe edge
preparation and orbital welding makes the job easy to be done
on-site or in the workshop.
Features
- Cold cutting, without influence the material of the pipe
- ID mounted, adopt T structure
- Varity of beveling shape: U, Single-V, double-V,J beveling
- It can also be used for repairing inner wall and deep hole
processing.
- Working range:12.5-240mm
- Driven motor: Pneumatic and Electric
- Customized machine is acceptable
Technical Parameters
| Brand | Bohyar |
| Model | BPP3PE |
| Drive Mode | Electric |
| Electric requirement | 220-230V 1PH 50/60HZ |
| Power | 1.43KW |
| Application Range (I.D.) | 36-90mm |
| Wall Thickness | ≤20mm |
| Rotating speed | 3-50rpm |
| All standard accessories included |
*Electric: Rated voltage of 220V, 50/60Hz
Installation & Processing
■ During installation, the tools should not touch the feed spindle
and the expansion block.
■ The expansion block should not be stretched too deep into the
pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting
conditions to avoid damage of blades and parts in the machine; In
case of vibration of the machine or uneven bevel face, timely
tighten the expansion hand wheel to prevent the looseness of the
expansion, which may cause damages to the machine.
During installation, the tools should not touch the feed spindle
and the expansion block.
■ The expansion block should not be stretched too deep into the
pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting
conditions to avoid damage of blades and parts in the machine; In
case of vibration of the machine or uneven bevel face, timely
tighten the expansion hand wheel to prevent the looseness of the
expansion, which may cause damages to the machine.
Product series
| Model | Processing range (IDmm) | Wall thickness (mm) | Rated power (kw) | Rotating speed (rpm) |
| BPP1E kit1 | 12.5-15 | ≤3 | 1.43 | 3-70 |
| BPP1E kit2 | 15-20 | ≤5 | 1.43 | 3-70 |
| BPP1E kit3 | 20-28 | ≤6 | 1.43 | 3-70 |
| BPP3E/ BPP3P | 26-79 | ≤15 | 1.43 | 3-70 |
| BPP3PE | 36-90 | ≤15 | 1.43 | 3-50 |
| BPP4E/ BPP4P | 45-105 | ≤20 | 1.43 | 34 |
| BPP6E/ BPP6P | 65-159 | ≤20 | 1.43 | 34 |
| BPP9E | 80-240 | ≤15 | 1.43 | 16 |
*Electric: Rated voltage of 220V, 50/60Hz
Information and Feedback
Maintenance Information: Before the machine or any of its
accessories is returned for maintenance, please call Bohyar
Company. We will give suggestions on transportation and handover of
the machine or accessories, and estimate the time and cost of
corresponding maintenance.
Feedback: To constantly improve the satisfaction of users with the
product quality and service, we will appreciate if you contact us
to present any better operation or service methods of the equipment
or any suggestion on the optimization of any technical data. We
will consider and undertake to validate your precious suggestions,
so as to modify or update the product and operation manual for
improvement.
