Product Introduction
The climbing pipeline cutting and beveling machine (Travel Cutter)
is the pipe processing equipment independently developed by Bohyar
based on the market and prospect of pipeline service industry. The
product is portable, precise, and efficient and in modular design,
fully meeting customer demands, it can cut and bevel all common
pipe materials, so this travel cutter is the perfect choice for the
cutting and beveling of various pipes.
Industry Application
It is widely used in long distance transport pipeline, power plant,
nuclear power, petroleum, chemical engineering, natural gas, boiler
shop, pharmacy, pipe prefabrication plant, pipeline installation
engineering, rush-repair work, etc.
Features
■ Compact Design
Easy Set-up Light weight, low profile design needs only 10"to 12"of
clearance and set up time is 30 minutes or less. Once the
adjustable drive chain is pinned together and tensioned around the
pipe the machine is ready to operate.
■ Standard Weld Prep Capability
Weld preparation detail can be achieved from common 30° and 37-1/2°bevel on standard wall carbon steel.
■ Pipe Line Maintenance
Bohyar’s Travel Cutter offers the inherent advantages of a
completely sealed and self-lubricating closed loop system. It is
particularly suited to field machining operations under the type of
hostile conditions often found in pipe line maintenance and
construction such as dirt, sand and water.
Technical Parameters
Chain Length
Pipe Size | Type DI/S | Pipe Dia. | Add on Length² | Total Length |
6" | S | 6.625" (168mm) | 0 | 42" (1067mm) |
Di | 6.90" (175mm) |
8" | S | 8.625" (219mm) | 5" (127mm) | 47" (1194mm) |
Di | 9.05" (230mm) |
10" | S | 10.75" (273mm) | 8" (203mm) | 55" (1397mm) |
Di | 11.10" (282mm) |
12" | S | 12.75" (324mm) | 6" (152mm) | 61" (1549mm) |
Di | 13.20" (335mm) |
14" | S | 14.00" (356mm) | 2" (51mm) | 63" (1600mm) |
Di | 15.30" (389mm) |
16" | S | 16.00" (406mm) | 6" (152mm) | 69" (1752mm) |
Di | 17.40" (442mm) |
18" | S | 18.00" (457mm) | 7" (179mm) | 76" (1930mm) |
Di | 19.50" (495mm) |
20" | S | 20.00" (508mm) | 2" (51mm) | 78" (1981mm) |
Di | 21.60" (549mm) | 7" (179mm) | 83" (2108mm) |
24" | S | 24.00" (610mm) | 13" (330sm) | 91" (2312mm) |
Di | 25.80" (655mm) | 96" (2438mm) |
30" | S | 30.00" (762mm) | 20" (508mm) | 111" (2819mm) |
Di | 32.00" (813mm) | 116" (2946mm) |
36" | S | 36.00" (915mm) | 17" (432mm) | 128"(3251mm) |
Di | 38.30" (973mm) | 133" (3378mm) |
42" | S | 42.00" (1067mm) | 19" (482mm) | 147" (3734mm) |
Di | 44.50" (1130mm) | 152" (3861mm) |
48" | S | 48.00" (1219mm) | 17" (432mm) | 164" (4166mm) |
Di | 50.80" (1290mm) | 21" (533mm) | 173" (4394mm) |
54" | S | 54.00" (1372mm) | 20" (508mm) | 184" (4674mm) |
Di | 57.26" (1454mm) | 194" (4928mm) |
60" | S | 60.00" (1524mm) | 18" (458mm) | 202" (5131mm) |
Di | 61.61" (1565mm) | 13" (330mm) | 207" (5258mm) |
72" | S | 72.00" (1829mm) | 38" (965mm) | 240" (6096mm) |
Operating Instructions
■ After the pipe is cut half, insert the steel wedge into the slit
of the cut pipe to prevent the pipe from clamping.
■ Sharp cutters will ensure safe, accurate, dependable cuts. Please
carefully observe whether the cutting tool is sharp before cutting.
■ The cutting condition will be drier when cutting cast iron and
ductile iron pipe. Usea thread cutting oil or a water soluble
cutting oil on steel and stainless steel pipe to lubricate the
cutters and help maintain sharpness.
■ Use specialized guide track when cutting in a vertical position or
when exact accuracy is required.
■ Adjust the feed rate to reduce or eliminate cutter overload. Feed
valve must be opened very slowly to achieve a slower feed rate. For
complete control of feed speed, install throttle valve in the feed
line.
■ The maximum effective cutting rate for the Travel Cutter on
ductile iron is approximately one minute per inch of diameter. Some
cast iron, steel, heavy wall pipe and beveling will require a
slower feed rate.
Notes
Warranty Information: The climbing cutting and beveling machine
(Travel Cutter) produced by Bohyar has a warranty period of one
year. In case of any quality problem during the warranty period, we
will provide free maintenance and repairment service.
