Solenoid Valve Parts Two Way Two Way Silvery Color Stainless Steel
304 Solenoid Stem Used For Pneumatic
1.Let's take a good look at the specifications of BAPC309029011:
1.1 This silver sunshade solenoid spool consists of a combination
of a fixed core, stainless steel tube, moving plunger, spring,
O-ring and seal.
1.2 Installation overall size: Tube diameter 9.0mm, Tube height for
coil installation 29mm.
1.3 The working voltage is DC/AC.
1.4 Type: 3 way (top plug has vent)
1.5 Usually used on pneumatic solenoid valves.
2.Do you know the advantages of BAPC309029011?
2.1 We use high-quality materials to make products, because the
products made with good materials can improve the service life of
the products themselves and can be well protected.
2.2 We use noise-free AC to improve the sound or noise caused by
the product during use, and the working environment is improved.
2.3 We have a variety of advanced welding processes to improve the
selection, such as argon arc welding, silver welding, laser
welding, etc., using advanced welding technology can effectively
improve the strength of the product.
2.4We will perform multiple inspections before the product leaves
the factory. First, we will ultrasonically clean the parts after
the production of the parts, to eat the stains and grease on the
parts.Then we will test the product's leakage and safety
performance after the product is assembled to ensure the quality of
the product.
3.Matching Solenoid Coil Example:
4.About the sample:
4.1 If you still can't find the product you want in our powerful
product library, then you can contact us, we have other methods,
you can give us the drawings, let us personally make you The
product you want.
4.2 There is a very strong and excellent team behind us. We will
have special people to do special things. Some people will talk to
you specifically. Someone will come to you to make products.
Everyone can play their strengths. come out.
5.About the working principle of pneumatic solenoid valve:
There are closed chambers in the pneumatic solenoid valve. There
are through holes in different positions. Each hole of the
pneumatic solenoid valve leads to different oil pipes. The middle
of the cavity is a valve. On both sides are two electromagnets.
Which side of the magnet coil is energized. The valve body will be
attracted to which side; the pneumatic solenoid valve blocks or
leaks different oil drain holes by controlling the movement of the
valve body, and the oil inlet hole is normally open, and the
hydraulic oil will enter different oil discharge pipes. The oil
piston is then pushed by the pressure of the oil of the pneumatic
solenoid valve, thus controlling the mechanical movement of the
entire solenoid valve by controlling the current of the
electromagnet of the pneumatic solenoid valve.
6.Factory environment:
7.Contact information:
| 1. Tel: 86-0574-83879820 |
| 2. Fax: 86-0574-83879819 |
| 3. Wechat: brandon1986 |
| 4. You can also leave a message below the website and we will
respond to you within 24 hours. |
