Durable Industrial Metal Detectors / Food Safety Detector In
Biscuit Processing Industry
The role of metal detection in food processing industry
Metal contamination of food products is a fact of food
manufacturing life. Even with the most
robust metal detection controls, metal contamination of food still
occurs. As is the case with many
aspects of food safety our objective is the reduction of metal
hazards to an acceptable level where
total elimination is not possible.
If we take a look at modern food manufacturing processes we see
that many unit operations involve the
use of metal materials such as cutting, slicing, crushing, sieving,
mixing, pumping and
packing. Beyond this, metal is the standard fabrication material
used in machinery, utensils and
handling equipment. Add to this the potential risk of contamination
of ingredients purchased from
suppliers we can see that metal contamination presents a
significant challenge for food safety.
Over the years developed , food standards and large retailers have
developed requirements which demand
food businesses to adopt a series of controls to reduce the risk of
metal contamination. The approach suggests that reliance on one
single measure is inadequate to address the risk and by
implementing multiple measures of control and detection the food
company can offer the consumer the
best level of protection. These controls typically take the form of
inspection, checking, detection
systems and removal of potential metal hazards.
Standard replace use Layout parts :
One set of hex wrench
Full sets of the range calibration test cards(Ferrous,non-ferrous
,Stainless steel)
Warranty
12 month labor and parts
Full life technical support
Packing and shipment
Full machine takes of two layer package
Prepackage takes of plastic bags conveyor the full machine and the
key parts have foam plastic protection
Eng package takes of Strong ploy wooden case that meet different
country import standard
Installation and use
When you takes of the package .up the rubber base ,use wheel move
it to your work place.
Then down the rubber base and fasten it..keep all the base in a
horizontal
Then running the machine few hours before use ,No need complex
installation .
The user guide will make in book and Videos for customer reference
.
Sensitivity reference
Details Tunnel size | 40*12cm | 40*15cm | 40*20cm | 50*15cm | 50*20cm | 50*25cm | 50*30cm |
| Sensitivity Fe(mm) | 0.8 | 1.0 | 1.2 | 1.0 | 1.2 | 1.5 | 2.0 |
| Sensitivity SUS(mm) | 1.5 | 2.0 | 2.5 | 2.0 | 2.5 | 3.0 | 3.5 |
| Detection height | 120 | 150 | 200 | 150 | 200 | 250 | 300 |
| Detection width | 400 | 500 |
| Belt speed |
10-35 meters per minute adjustable |
| Alarm method | Light and sound and optional reject |
